Tite-Reach 3/8" Do-It-Yourself Extention Wrench

Undoing header nuts on a motorcycle.

This is one of those tools that when you need it nothing else will do and it is very useful. A must have

Not used yet but I'm sure it will suit my purpose. It's plastic but should be okay for DIY tasks on the car.

great for these hard to get bolts and nuts

Arrived on time and just as advertised

Pas u le temps de fer essais évalue-t-on trop vite faut l'essentiel le temps

Bueno se mira muy corriente el material de plastico como si fueran chinas no las e usado

Had to repair the fuel drain valve on a 99.5 Powerstroke. This is a BEAR to get at because of the super tight space and nest of glow plug wiring (in my particular model vehicle). Some model years use a glow plug module which makes for a substantially cleaner access, but that was not to be in my case.Was able to clear some of the wiring out of the way and get this tool in there with T20 Torx bit. Once the driving could be started, it was just minutes before all 4 screw were out. Same with reinstall of the repaired valve. Took much longer to get the valve into position and secure it with a few turns of one screw. Once that far, this tool made the rest a cakewalk. Really impressive tool.OK, it’s plastic. For the lighter jobs, it’s just fine. Didn't stress it on torque, either. If you want really rugged, open your wallet for $120 for the metal one. Either way, the first time you use it, it will probably pay for itself. In my case, Ford charges $360 for the repair I did for $40, $30 of which was this tool.

Die Idee ist Super , allerdings ist das Werkzeug zum Großenteil in Kunstoff gefertigt und zu globig geraten , ich denke das das Preis Leistungsverhältnis nicht passt.

Outil super pratique pour réaliser de la mécanique dans des endroits difficilement accessibles.