FARBIN 4pcs Loud Train Horn for Truck Car, Super Loud Car Horns 12v Waterproof Auto Horns, Electric 12V High and Low Tone Horn Raging Sound (Two pairs of horn, 12v)

Easy to install and sound quality of horn is great!

These are loud horns by the original equipment manufacturer of the single horn installed by Honda in my 2024 CRV. The original horn seems slightly beefier in construction but the difference may not be significant to longevity and reliability. My package contained four horns (two high, two low) but lacked much of the attachment pieces advertised. This made installation troublesome to fabricate wire connectors and find suitable nuts. I did not purchase a Honda power connector piece or Y-cables but they would likely have been useful. I installed one high frequency horn and one low frequency horn using the factory mounting points in front of the radiator. An additional bolt was needed for the passenger side which had a threaded hole in the right location for a second horn but with no bolt. The new high frequency horn (driver's side) fit well. I modified the bracket for the low frequency horn to recess a bit more toward the engine. The low frequency horn is larger than the high frequency horn and the horn mouth fit very close to a barrier so that there was very little clearance for sound to escape using the supplied mounting strip. I bent the mounting strip so that the horn mouth would be aimed at an open area and I cushioned the back of the horn to avoid transmitting a rattle to the car frame. The wire tabs on the horns are sturdy and can be bent if needed. I rigged an electrical connector to mate with the Honda power connector and used heat shrink tubing at each wire end. I used sections of CPAP air hose for wire protector sleeves and two 5-position WAGO style splicing connectors for the middle connections between the power and the two horns before wrapping the splicing connectors with Gorilla tape. There is a significant sound level increase with the two new horns installed. It is now a big-car horn and enough like a locomotive horn to satisfy me.

Finally found a horn set that’s as loud as they claim and at a great price. The thin metal they sent for mounting broke. Luckily, I zip tied the wires so it didn’t fall off and I lost it so I just need to figure out a thicker mounting system which they should do already.

Bought to put in my Toyota pick up. Not as loud as It should have been

They sound great i bought the set of 4 to make sure they'd be loud enough and decided to remove two after finding that they sound like train horns with all 4 installed. Worth every penny spent and super easy to hook up!

Parts missing, no bolts., not even wires

"Universal" almost wasn't universal enough for my CR-V, but I still managed to get them installed and working. The pigtail wires were long enough, but just barely. I would really have appreciated an additional half to three-quarters of an inch. Tapping connectors for attaching the pigtails to the existing wires were required but aren't included and I had to go buy those separately ($5). (Honda's 18- or 20-gauge wire certainly didn't make that easy.) An optional compatibility kit that had the pigtails already wired to a connector that mated with the one for the original horn is an option I would gladly have purchased if it were available. The sound is what it claims to be: louder than the Fisher-Price horns the vehicle came with. I'm satisfied, and I now have another pair I can install on the other vehicle.

Not that loud but sounds better than stock

Son muy buenos solo que son lago difíciles de armar y las regletas son algo cortas