Woodworking MT2 Heavy Duty Live Tailstock Center

Excellent quality product.

Live tailstock drive is spot on and absolutely quiet! Bought a cheaper one from another retailer and to return it as the bearings were noisy!

Good value and good quality on time and using all the time

It works well.

Good value for money

You spin me right round, baby right around, like a record baby right round, round round.

Product was exactly as described and arrived immediately

Well engineered and have no problems. Recommend.

I'm seeing a lot of reviews bashing this live-center about crunchy bearings and a soft tip, the one I got had buttery smooth turning. Lot of 1 star reviews about the tip, it looks like they're just pressing it into the workpiece as a forming tool, which will only mushroom the tip. It's meant to be soft, but most people use this product wrong; here's what you have to do use utilize this tool, for the new turners: • Use a center drill set, I have an Accusize center drill set( $24 on amazon, amazing set. Just remember that you're not supposed to feed it into the workpiece at mach speed, that'll cause it to shatter/break. • drill a center hole how ever small or large you want in your piece, there's no way around this if you want to turn something that's sticking out too far from the chuck, this will pretty much eliminate chatter. • place your live center in the tail stock, bring it up to your work piece's center hole and apply moderate pressure. (Keep in mind, you aren't supposed to apply so much pressure that it bends the tail stock away from the piece, that's probably why you're hearing crunch bearings. It's not meant for that much pressure when you don't even need it anyways. you just want enough surface contact with the live-center's head to add rigidity to your workpiece's end. If you don't want to drill a hole in your workpiece, then you need one of two things: A steady rest or following rest. A stead rest can move where you put it on the ways and has 3 cylinders with bearings(Usually) that the workpiece rests on. The following rest bolts to your compound so it moves with your cutting tool, this only has only 2 cylinders or adjustable pieces that lightly press against your work piece's backside to remove chatter, bending and add rigidity. But be warned, both of these rests take up a lot of space, especially if you have a mini-lathe like me. The live center only needs a tiny hole to sit in at the end of the stock to work. The photos I added show what you need to do to properly use a live center. I used black marker on the tip to show where the pressure is supposed to be placed, it's not on the tip but just behind it. I've made my hole pretty big so yo guys could see it. Hope it helps for those who didn't know when they're starting out like me.

The quality of this live centre is great, no issues at all.

nice unit. fit my ShopSmith

Works great, fits perfectly, rolls smooth

On the large size but preformed good.