Gunson 77066 Trakrite Camber Gauge

Having previously bought a similar looking device online and found it useless, the bubble was very sluggish to move making it inaccurate in the extreme. I just could not get an accurate reading on it. I bought this one and what a difference, I was able to set the camber on my car with ease, the gauge was very sensitive and showed the slightest movement of the adjuster. In this case, buying the cheaper one earlier proved to be false economy. Having rebuilt the steering on my car I was very pleased to be able to set the camber so quickly and simply using this gauge.

A simple tool to use but you must be on level ground. I use a steel bar on my alloy rims the magnet is very powerful. Also make sure to calibrate on a vertical surface with a spirit level before use.I am fortunate with my old Audi 100 as the strut top mounts are adjustable for camber. I also recommend that your tracking be checked if any camber work has been done as altering camber will also change toe.Good value but fully read the instructions.

Good piece of kit, however it's very important to remember that the car either needs to be standing on perfectly flat/level ground or -when calibrating the camber gauge- you need to set it to exactly match the angle of the ground the car is stood on (otherwise you'll be measuring the camber plus or minus the angle the ground slopes at).UPDATE:I realised when using mine today (for only the third time) that the markings are pretty much meaningless - it's graduated from +6 to -6 (which I think are supposed to represent +3 to -3 degrees in half degree increments) but I checked it against two other (good quality) level/angle finders and the -5 indication equated to 2.9 degrees. I never checked this when I first got it but have to assume it's always been wrong!

A good quality item, exactly as advertised. A simple tool to use but you must be on level ground to get a good result .i am rebushing the front suspension on a Triumph spitfire and you need to reset it all after replacing the control arm bushes.But i still had it checked by my local Tyre fitter. And he was surprised just how good/ close i had got it, using this camber gauge .

Very impressed - rebuilding the suspension on a Jensen Healey and you need to get the camber right after replacing the control arm bushes. You can do a bit of DIY stuff - an inclinometer app on a smartphone is a great way to do it - but this was cheap enough to save the bother and dead simple to use.

Easy to use good product at right price.

Inexpensive tool. I would rather to use it for comparing the camber on a pair of wheels rather that setting from the start..

I received this beautiful Gunson 77066 with nice packing. Thanks to seller Tool Academy. I was praying not to receiving the defected item from seller. I received perfect and well made . I would recommend Tool Academy and will purchase again from this seller !