CAR PASS Leather 3D Foam Back Support Car Seat Covers Full Set Air Mesh Automotive Seat Covers, All Season Car Seat Cover Fit Automotive,SUV,Sedan,Van, Airbag Compatible Elegance (Black and Yellow)

My goal in buying these was primarily protection. I wanted to preserve the original seats on a brand-new vehicle from dirt/damage/etc, particularly because I tend to get dirty at work. Back seat cover is primarily because I tend to haul my dogs around in the back. Passengers much less often. So I didn't need/want something expensive primarily for looks. I wanted "good enough": Looks good enough, fits good enough, lasts good enough.5-star stuff:Fit on the front seats is very good indeed, a solid "A", and probably the most important factor since that's what I'm gonna be sitting on / looking at every day. Nearly fits as well as I'd expect 'custom' covers for my make/model would (90%?). Just installed today so there's a bit of rippling in the 'leather' areas, but they're snug enough I expect that'll shortly be gone with some use and warmth.Material & stitching seems of good quality for a front-and-back set that cost $65. It's not 'moose hide' or anything, but doesn't seem ready to shred or rip at a glance either. Nice padding on the fronts.4-stars:Installation. I didn't expect them to just fly onto the seats themselves, and installation was pretty easy. Yeah it required some yanking and stretching and reaching into awkward places, but that's expected. One star off b/c instructions were pretty vague and weren't exactly for this set, just 'close'... like some straps in the instructions were not in the same place as on the actual set so I had to 'figure out' how/where to attach those.Also, on the front cover to 'hold down' the crease of the seat, there's a piece of fabric you're supposed to put through the 'crack' and velcro to the back-side. Except on my car the a separation between the seat bottom & seat back is blocked off. I'd have had to unhook the existing original seat cover to do that. Ditto on the back seat - straps to attach the 'crease' behind require a break between seat back and seats bottoms that doesn't exist on my car.3-stars:Front headrest covers. Fit was a "C". They're *kinda* the right size/shape for the headrest, but only kinda.Rear seat headrest cover fit was more of a "D", with the one for the center headrest basically an "F"... None were even close. Basically on there as leatherette bags over the headrest, and the center is truly just a bag cinched up over the headrest. I was tempted to call these 2-star, but rear seat isn't a priority for me, and we are talking about a $65 set... so they stay at 3.Rear seat cover fit. MUCH more 'generic' here. It sorta-kinda fit. I wish the seat-back portion had been a 'slide-down-over' style like the fronts vs. it's basically just a mat you strap on. The straps to secure it were far too long (even tightened to their minimum) so I had to jerry-rig those a bit using the mounts behind meant for infant car seat. (No infants in my life, thankfully). The holes for the seatbelt receptacles were only vaguely in the right place - some hunting-round will be required to buckle-up. Definitely nowhere even near a custom look, another "C" fit. But... good enough to keep off the dog hair.Nothing I'm gonna call 2 or 1-star, in light of the cost of this set and my expectations for it.One ungraded note: Yes, you have to zip/unzip the back side of the rear seat cover if you want to use the armrest or drop only one of the rear seat backs. I knew that from the listing. It is what it is.So I'm going with 5 overall, though I'd call it more a "4.6 rounded up". It would be 9/10 on a 10-point scale, not a 10. If this was a $99 set, it would absolutely be a 4, but it wasn't.Will return and revise if necessary as it sees use.

Just got this in today, and the installation was somewhat easy/straight forward-ish.The main parts was straight forward but the extra little parts was a bit confusing but it turned out great! I bought this specific one b/c it had pockets on the back seat. The cushion on the two front seats is not bad.So far, it looks like it stays in place. Seat belt holes is wider. I’d say I would recommend these ones.Fits my HONDA HRV 2025 SPORT

I installed these purple seat covers in my car. They’re leather and foam. So they won’t collect cat hair. 🐱They weren’t that easy to install though cause the front seat covers felt a little tight. And I wasn’t able to tighten it through the middle of the seat cause the part you push through the back wasn’t long enough, especially since the cushioning of the seat upholstery was too thick. But they look nice up front. As for the back, that took longer to do. Especially being I did this in a dark garage. But the back seat covers have straps at the bottom that can’t be fitted tightly because the instruction manual was terrible. They were hard to understand and the pictures were so tiny. So I just guessed and they look nice in my car. The back seat covers just aren’t fitted at the bottom but that’s okay. No one really sits back there anyhow. Oh, and if anything gets spilled on them they’ll be easy to wipe up too.

Why did you pick this product vs others?:Loves the memory foam seats for extra comfort. Fits perfectly in the truck.

Good leather and cloth combination. It’s very comfortable.

Fitted perfectly for my 10th gen Corolla. Good padding and the Velcro was the finishing touch.

These are nice seat covers but it took some work for me to get the back seat cover to look ok.1 - The front seat covers fit nice & snug and look nice.2 - The backs. That's a whole different story. I have a 2014 Corolla basic model and my back left/right headrests do not adjust (they are just sewn down), so I couldn't tuck the top of the cover under the headrests except for the middle one.Three of us couldn't figure out how to use the plastic round pieces it came with - the instructions weren't that great for those little things. The adjustable belts that goes on the side & behind the seats aren't elastic or tight enough, so it didn't give the covers a snug fit. The entire seat cover looked like a big loose sack on the backseat when I put them on. Sooooo, I had to get creative:I bought upholstery tacks and cut some of it to go around the headrests and tacked them down for a snug fit. I don't really ever have anyone sitting in my backseat, so there won't be any daily pull on the fabric, so this is just a cosmetic fix to make them look more snug & natural. I didn't cut it perfectly as you can see but I can deal with that as long as it doesn't look like a giant sack on the seats. I'll have to monitor to see if the tacks get loose or fall out but for now it's ok.3 - Didn't bother to put the headrest covers on the back seat because they were way too big since mine are sewn down and not identical to the front seat headrests. It would have taken too much work to make them look snug (not a big deal).4 - Overall, I like these seats covers. It gives a nice slightly lifted and cushioned feel on the butt area and feels supportive on the back.My car's original light grey fabric seats stained easily - so once I cleaned them again for the 100th time, I finally decided to try seat covers for a new look and I can deal with these. They give my car interior a fresh new updated look!

The size of this doesn’t fit my car