One For All TV Bracket – Tilt (15°) Wall Mount – Screen size 32-90 Inch - For All types of TVs (LED LCD Plasma) – Max Weight 100kgs – VESA 200x200 to 600x400 - Free Toolbox app – Black - WM4621

One 4 All Turn 180 used on a 32" JVC (6kg). Brilliant bracket this which importantly does support vesa 200 x 100, despite what another review here says. The bracket is already assembled in the box. So you literally just put the three screws in the wall. And four screws in the TV. The first two screws can be fitted to the TV first then you just hang it on. The last lower two screws you put in after to prevent it coming of the bracket.One small issue I had was with the many sets of screws it comes with. The smallest size were the ones for our TV but the bolts were too long. There are some washers and lots of large spacers, but with the small bolts the washers would have fallen off. Luckily the screws from the TV stand had bigger heads so this was all perfect in the end.

used this to hang a 40kg 75" tv. the width of the bracket was good as it was able to find two batons and the rest of the hold were extra support. Not an issue of the bracket but more the TV, when you hang the TV then you need a very long screwdriver as normal screwdriver and not long enough. I needed to use one that was around 30cm long or it gets difficult to adjust.

The horizontal bars that are mounted on the TV are a bit too long for my liking.When you hang the TV you can't swing the bottom out very far to plug in the cables as the top of the bars hit the wall above. It's a sturdy piece of kit, but I can't see why they've made the bars so long as it makes it really difficult to plug everything back in.

This was for my sons room for 65" TV. opened the box and read the instructions. It had a cardboard template which made the installation easy and quick. It had its on spirit level. It took about 20 minutes. 10 minutes to set the template square to the wall which allowed me to mark all the holes i was going to drill. The 10 minutes to drill the holes put in the fittings and fasten the bracket to the wall. then hoover up.This is the 3rd one i have installed in my house and by far the easiest

I had never drilled a hole before let alone put up something as important as a TV wall mount, but I went straight into getting my hands dirty with this.The instructions I wish could of been a bit more clear, they are very simple but I guess they have to be quote generic due to the different TV sizes it fits, but still I felt it was quite basic & more for people who have probably done this sort of thing before.Considering the price of this you really can't go wrong, they send you all the different screws, washers etc that you may need covering all the listed TV sizes which is nice as leaves you with loads of spares for potentially upgrading your TV or other projects.Overall I'd recommend based off my experience, great value for money.Once I got the hang of what I was supposed to be doing though it was fine, I got it onto the wall fine & so far it's held my TV up perfectly,

I used this to mount a heavy 50" TV to a bedroom wall.I used an SDS drill to drill into the wall which definitely helped.There is a cardboard page which is folded in half, on the inside it contains the positions for drilling the wall holes.I only found it after I did it the hard way, placing the bracket on the wall, marking the holes with a pen and then drilling in the centre of the pen marks.Whichever way works :)From start to finish the entire job took no more than 5 minutes, including drilling and putting the television on the wall.It feels very sturdy.You will need a long flat screwdriver to fasten the screws on the bottom of the TV attached mounts to ensure the TV is locked to the bracket.

Like:This has a bar across the middle giving extra sturdiness to the frame, so can handle the extra weight if need be of a 100” TVDislike:The apparent size of the frame of the bracket looks bigger than it actually is from the representative pictures, was hoping to get a 2x double socket for all power requirements hidden either side of the middle strength bar - does not fit !Be extra mindful of your actual measurements available if you have any sockets behind TV for cable management / concealement

Did exactly what it said on the box, it hung my 75inch TV and it did it well and it was far cheaper than the one they were trying to sell me a currys ! Only one negative, purchased for its slim dimensions Found that once I’d hung my TV on the hooks on the top of the bracket you can’t get to the securing screws on the bottom of the bracket, even though not locked into place haven’t found that an issue yet !! (and a little bit of a squeeze fitting all the wires but that might be my TV)