BeeHive Mirror and Picture Hanger MAX

Description

Pack of 6 Max Beehive picture frame hangers, 6 support pins and 24 screws. Hight 51.4mm Wide 63mm o/a Each MAX hanger has 143 hexagonal openings, giving you 143 positions for adjustment on each corner of your frame. Weight rating for the MAX Beehive Picture Hangers is 13kg* Each order includes wall support pins and 4 screws per hanger… all the hardware you'll need! BONUS: The MAX hangers can be attached across the miter joints of your frame (as shown below), adding support and helping prevent separation of the joints. This is particularly useful for heavier, larger frames. Can the hangers be used on material other than drywall? Yes, however, if you're inserting the Support Pins into material that is harder than drywall, we recommend pre-drilling a small pilot hole. What's the difference between the Original and Max The primary difference between the two sizes is the overall dimensions and number of openings in each. The Max hangers have 143 openings, while the Original hangers have 68 openings. An added benefit of the Max hangers is when they're attached across the miter joints of your frames, they will add strength and stability, helping prevent separation of the joints on larger, heavier frames. The Beehive Picture Hangers are rated up to 13kg per set. These ratings are based on using two hangers on each corner of your frame along with the hardware that is included with your hangers. Our tests were conducted using 5/8" 15mmdrywall (sheetrock). What size frames can the hangers be used on? The Original and Max will fit almost any size frame. The frame should be a minimum of 7" wide on the inside when mounting the hangers on the top rail (Illustration 1), and a minimum of 4" tall when mounting to the side rails (Illustration 2). What's the minimum width required for the frame rail? 5/16" 8mm Can the hangers be used on a variety of frame shapes? Yes. even Ovals and Circles