Front & Rear Fender Flares Compatible with 2018-2024 Jeep Wrangler JL & JLU Unlimited Sahara, Installed on the Original Fender Flares(Not Fit High-Rise Flares, Not fit 4xe)

This product was packaged very well and arrived with rivets and screws needed for insulation. You do need a plastic rivet tool in order to complete the installation. I did not need to use a drill. I pried up a little on the rivet and used a tool to cut the rivet off. Installing the new rivets was very easy using a plastic rivet installation tool which you can buy separately for 17 or $18. Each Fender Flare is labeled very clearly as front or rear and left and right. I started the installation with the center most rivet and worked my way towards each of the edges of the fender flare. I had to hold the flare in place while I inserted the rivet but once I did everything matched up really well. There's very little gap between the fender flare and the original fender. It does look very nice and seems to be very good quality plastic. It seems very secure. Overall I'm very happy with this product and I expected to last a long time. Time will tell however if the plastic is of good enough quality so as not to discolor rapidly over time faster than the fenders do. I suspect using the same product I would use on the fenders to protect the plastic should work.

OEM look and fit. Great packaging as well. I did not use the included rivets, but very pleased with the quality of the extensions. Simple installation and each piece is labled which corner it's for. Pretty easy to figure that out though lol, but I appreciate the attention to detail. Highly recommended.

Good packing Strong built Easy install but you do need a plactic rivet tool about 17.00 diff keeps the rocks and mid off

I put these on a 2024 jeep wrangler Rubicon. At first out of the box I was a little worried, because I immediately, (based on past reviews of unaligned hole), held them next to my fender wells to see if the holes line up. Initially I thought they didn't as there are more holes in the new flare than native rivetsnin my fender. However, this became a good thing. The flares do have holes that line up perfectly, you just have extra holes in the new flares so that you can secure it more tight with the screws that comes with the kit. It actually brings it closer to the existing fender. A lot of people were complaining that the rivets were too small, I initially thought the same until I realized how to put them on properly, (use them properly), then they worked perfectly. The flares will act warped and not form fitting, but once you line up a bottom rivet in the correct hole and top hole, it will hold it in place, and when you put the rest of the rivets in, it probably molds secure in place on the fender. And again, the extra screws help you mold it even tighter. See pictures. I went from initially disappointed thinking I would have to return them, to extremely satisfied. It took me longer to be hesitant and figure things out than it did to actually put them on.

Its ok. Plastic. Went on easily... Hardest part was removing rivets from fender. Im not completely satisfied though, i didnt realize the fron ones dont go all the way down the back part of the fender like others ive seen. The rear ones do. The front 4-5 inches from bottom of fender. It looks weird. Wish i had known. I wouldn't have bought it

The fender flares seem to be holding up quite well after some New England winter driving. They have done a decent job directing road slush, sand, salt, and mud away from the body. Easy to install with correct alignment For the price of a few plastic pieces, it would have been more reasonable to include extra fasteners and tools to assist with removal of old fasteners and install of new flares.

These fender extensions arrive on time and in perfect condition, which is important. Then, even better than that, they lined right up to the fender mounting holes and look fantastic. We're happy with our purchase

These flare extensions fit well and work. I did have some challenges with the plastic rivets on the lower rear hole on each of the them, but worked through it. They add and extra inch or so of coverage for the tires throwing grime on the side of the jeep. I still get quite a bit, but it is better. They will also help when upgrading to larger/wider tires. I still need mud flaps eventually..

Easy installation..make sure to use a rivet gun specifically for plastic rivets. Look great on vehicle and have optically reduced the sticking out of terrain tires

I used another kind of push pins that do not require any tool and are flush with the extensions. Great product, easy installation

Estéticamente son muy geniales, y para los que ensanchamos las ruedas y sobre sale de la carrocería original, son muy funcionales para que no se ensucia en lluvias o charcos

Excellent product and fit. Easy install with a rivet tool.

These are perfect on jeep gladiator. Install was easy, no drilling, just plastic rivets that are supplied. Awesome!