Konhard CS002 Wall Bathroom and Shower Basket, Brushed Stainless Steel 2 Tier

Strong, tough good-looking fully stainless-steel bathroom shower caddy.Splashed the extra cash for a fully stainless-steel one, after seeing how normal chrome-plated ones start changing colour and gradually rusting at joins and water-collecting areas over the years, when growing up and in the houseThis ticks all the right boxes;Fully-stainless-steel, so no rusting, just wipe down with a wet cloth occasionally to reduce scaling in hard-water areas.Thick solid stainless-steel construction, with thick pipework and frame, so stronger and less breakable.Screw-fixing, as stainless steel is HEAVY, so suction-cups will fall off after a while.Mesh baskets, so no water-pooling in the baskets.Has Two wide baskets, so plenty of space for shower bottles etc, and lots of space between the 2 baskets for tall bottles to stack in the bottom tray.Space-saving design- designed to slot into the corner of the shower wall. Perfect for small shower enclosures.Attractive design, looks good and gives a touch of class to the shower area.This needs 2 people to fit - as one person has to hold the heavy steel frame and 2 baskets in place, while the other drills the 4 screws into the wall that both hold it together and attach it to the wall.Customer service is also excellent from Konhard - it has 4 steel caps to cover the top of the screws (which obviously won't be stainless steel) to stop them rusting.I found I only had 3 steel caps, so messaged them for a spare one - they instead sent me a whole new caddy!Well Recommended!!

Good solid basket, looks great. A bit fiddly to fit, but that could be just me!!!

As a few other reviewers have mentioned, this is tricky to install. It comes as 4 pieces (2 baskets, 2 brackets) and the only way to connect them together is by screwing them to the wall. Needing at least 3 of the pieces to measure the holes means needing another pair of hands (bit tight in a shower cubicle). TOP TIP - once you roughly know where the brackets are going, use a bit of duck tape to hold them in position to finalise the screw holes and level up. I also pre-filled the holes after the plugs had gone in with a little mastic sealant before screwing in place to prevent any water ingress.Nice looking product, definitely brushed rather than plated so should last a while.

My previous chrome plated shower caddy of course rusted after a period of time. Buying a Solid Stainless Steel Shower Caddy made sense as I don't want to have to keep taking these things down every few years. The Konhard Caddy looks well made and rust proof albeit I won't fully know that until after a few years. Its a heavy item so you need to keep it exactly in place to make your marks for the wall plugs. Might be a good idea to have someone help you at this point. The silver caps to hide the screws are a good idea but make sure you put the plastic insert the right way round or it won't fit properly. Its the best caddy I've fitted in my bathroom and looks good in place.

Good quality shelves but would not buy again as they were terrible to install - a template would have been much easier or perhaps send them with clips to hold the four separate pieces together while you hold them up to mark the hole locations. We had to use a lot of tape and two people were needed which is ridiculous for just bathroom shelves.They do look & work well once instled though.

The product itself will last forever, however, that is if you can fit the product onto the wall. the product comes in 4 parts that can't be fitted together prior to the installation. Therefore, you can't mark the holes or measure the holes without the product somehow held together. As this is normally fitted in a shower, there is no space for a second or an extra person to assist with holding the product onto the wall. Therefore, a single hole needs to be drilled in the hope that it is correct. Then a second, ........ you get the idea. All of this could be resolved if the seller or manufacturer. could simply provide a paper or cardboard template that could be placed onto the wall of the shower to mark the holes.I will not recommend this product for anybody. I can guarantee that even a contactor might need to replace a few tiles by the time he is done fitting this product as you ar bound to drill the holes incorrectly.

Really nice product. Looks expensive and good quality. We ended up just putting up the trays and not the frames which was super easy. We bought 3 for all our showers but we only needed one tray in a couple as these are a pretty good size. I have loads of stuff and 2 trays in my bathroom is plenty of space. Very happy with this so far.

Put this up today. It is very study and of good quality. Fits the corner of our bath really well and looks great. Word of warning, it isn't a pre-assembled unit, so the screws that hold it to the wall also hold the pieces of the unit together. I taped the 4 pieces together so that I could mark the holes for drilling into the tiles and then took the tape off before putting it up. Unless you have 3 arms, there is no way you could put it up by yourself, but I'd still rate it highly as a good product!

Zuerst einmal ist die Qualität des Duschablage wirklich sehr gut und hat volle 5 Sterne verdient.Trotzdem ist das Teil in sofern verbesserungsfähig, als dass man die Montage und Befestigung des Korbes verbessern könnte.Ich habe, ähnlich wie hier schon beschrieben, mit 4 Stück VA-Senkschrauben der Größe M4x16mm und jeweils 4x Hutmuttern M4 und Unterlagscheiben die beiden Ablagen mit den vertikalen Stangen verschraubt.Dazu muss man lediglich die Bohrlöcher von hinten ansenken, um die Schraubenköpfe versenkt, also bündig zu bekommen.Dann nur noch 2 neue Bohrlöcher inkl. Absenkung in beliebiger Höhe (nach eigener Vorstellung) in die beiden Träger gebohrt und die eigentliche Wandbefestigung mit 2x 6er Dübeln und den beiliegenden Edelstahlschrauben kann endlich beginnen.Das Ergebnis hat mit wirklich überzeugt.Hier rostet nichts mehr und man kann den Duschkorb zudem einfach und umweltfreundlich mit Essigreiniger reinigen.

Bello, robusto, grande quanto basta, abbastanza adattabile, spero duri.

Après avoir lu des commentaires, je m'attendais à une très belle qualité du produit avec une fixation délicate et cela à été le cas. Le fabricant serait bien inspiré s'il fournissait la visserie inox nécessaire à l'assemblage de l'étagère du bas sur les 2 montants permettant la fixation au mur avec seulement les 2 vis du haut.En attendant on peut toujours se faciliter la tâche en prévoyant de les acheter soi-même.Pour autant la qualité du produit et son prix sont d'un très bon rapport.

mist bevestigingsmateriaal, haak is bijna plat. Vraag me af of er wel iets op blijft hangenhet lukte bijna niet om goede RVS schroeven te vinden die mooi afwerken.Helaas 2 dagen te laat om retour te sturen

Es justo lo que necesitaba.Es super bonita para la ducha y excelente calidad.Os la recomiendo.