Snailfly Upgraded Roof Rack Cross Bars Fit for Volvo XC40 2018-2025 Lockable Quiet Crossbars Cargo Accessories

Easy to assemble and very easy to install. We needed a simple solution that allowed us to mount a luggage carrier once per year. These were a great value compared to OEM KIA rails. Installed in about 15 min with no instructions needed. Quality seems good, fit and finish was perfect. From the reviews I seen the hardware quality seemed a bit sketchy. When we return from vacation, I will lubricate the hardware and mechanisms before putting away for storage. Highly recommend. Will update review if any issues are encountered.

So easy to install. Looks great on the car. They look and feel so durable. They are lightweight but can carry a lot. Would recommend for anyone that is looking for roof rack. Great purchase.

These roof racks are surprisingly easy to install and the clamps seem to hold onto the roof rails strongly. The clamps are also coated in rubber so they do not scratch the painted rails. The locks and plastic covers on the outside are fairly cheap feeling, time will tell how long they last. The size is perfect for our 2021 XC40, they fit perfectly. Cross bars are sturdy, hardware is good quality, bolts attaching crossbars on the outside are stainless steel. No wind noise up to 75 mph highway speeds in the position that I mounted them. Overall, for the price, they are a good purchase.

Overall: Solid crossbar that will hold a bag or whatever attachment. Obviously, better ones exist but this one will do the trick for more mild weather conditions. If you are in freezing conditions I expect that water will get in the cover and freeze it. Although, I am not sure why anyone would need to take it off at that point anyway. That said, works great for us.Good:1. Price2. Easy to install3. Rubber on clamps4. Plenty of room for sunroof5. Doesn't make too much noiseBad:1. Poor instructions (but there are youtube videos)2. Didn't have hex key (fallen wrench) needed for install3. Can't go all the way back on the rails but goes far enough4. The clamp covers aren't a perfect fit5. The lock cover needs a gasket or something to make it fit tighter. Water will definitely get in there if it's raining. I don't think that it will negatively affect anything in the short term but it might make some parts rust in the long term.

Snailfty Roof Racks Cross Bars Fit for 2021 -2025 KIA Sorento & SorentoHYBIRD Rooftop Cargo Crossbars with Lock(Only for Non-X-LINE Models with Flush Side Rails)POS Rack only locked when not on car.Could not get lock cover in far enough to engageInstall became a challange. After over 8 hours,used a bar clamp using signifcant force to complete theinstall. Do not buy this unless you are superman or havea great clamp.

Good fit. easy install. Worked well.

These look great and add a sporty look. Very good quality and affordable.

It took a couple of days, but I finally got the covers to fit...Okay, here's the TLDR version: They look good, almost like OEM, and very sturdy compared to others that I have tried and did not work. Fit and finish are a 6.5 out of 10. Covers require some manipulation, it's not just about using a torque wrench... I had to put some pressure on the plastic just below the lock to get the locks to engage... CAUTION: With the torque wrench set at 50LBS as the directions said, it stripped out the screwheads...Looks and performance: The fit and finish are not perfect, but good enough. They pass the 10ft and 3 ft tests. They look very similar to the OEM parts, and the connection to the rail is very sturdy. They seal off well on the top, and I looked for the clamps to have hooks on both sides to catch the contours on the rails which these do. Some of the "universal" cross bars have a flat side and no matter how much you tighten them, you can pull them off by hand. I gave these a thorough testing and I am confident they will do well.Installation and Instructions: The instructions are not great... but if you are intuitive they are pretty easy to install. The biggest challenge I had was determining the location of the bars. After doing some research, I placed them over/near the door seams.- Make sure they are at least 30 inches apart.- The distance from the top of the windshield is important for reducing wind noise, other the front door seam did pretty well for me.Tightening these was also a bit of a mystery. I hand-tightened them with the Allen Key that was provided, and even at that, they seemed pretty sturdy. However, the instructions call for a torque wrench set at ~50lbs. I was never able to actually tighten them down to the point where the torque wrench released. I ended up stopping out all of the screwheads (if this happens, you can use some channel-lock of vise grip pliers and get the screws off. The screws are M6 x 100 35mm)We went out for a drive and got up to 65 mph and didn't have any noticeable wind noise. As I mentioned above, the position/distance from the top of the windshield will be key to minimizing the noise.