Caydo 10PCS Black Self Adhesive Felt Sheets, Thickened Sticky Back Felt Fabric for Jewelry Box Felt Liner Art and Craft Making A4 Size8.3 by 11.8"

I bought this to cover the back of a grapevine wreath to keep the vines from scratching the door. The felt was flexible with a bit of stretch to it which didn't tear when gently put into place. The adhesive was surprisingly strong, yet I was able to reposition it as needed and it still kept it's adhesive qualities. The paper backing was easy to remove. It was also easy to cut with scissors with the backing on. It worked well on the bottom on a ceramic vase to prevent it from scratching a glass table top. The felt is about 1/16" thick.

Worked well for me! I used it as a liner for a homemade shade for my old Canon 300mm f/2.8 lens. Feels like the stuff Canon uses. Seems to hold up well but it was a little difficult to apply however I know my a application isn’t typical.I think it’s probably great for a craft material and I’d certainly buy it again.

I have several bracelet holders and the heavier cuffs just dangled loosely which didn't show the design on top and/or didn't look Nice. I used one sheet on each "bar" to make them a bit thicker, hence better fitting the bracelets and making the display more attractive. Easy peasy, cut to size, peel and stick.

PROS:• Not rigid or stiff, felt material allows some stretchability to reach edges or close gaps• Adhesive feels weak but sticks surprisingly well, especially to car interiors with textured trim (depicted in photos)• Adhesive did not fall off after application to car interior trim, even when parked in direct sun where interior was hot• Protects car interior trim from scratches and scuff marks• Adhesive is very forgiving and can be re-applied many times to get it just right• Easy to peel off in the future with no residual residueCONS:• Can be difficult to cut, especially if object is not sharp enough• Felt fibers has a tendency to rub off easily

I got these so that I can put these on the bottom of my 4" x 4" coasters.You can cut them to anysize and just stick them about anywhere.After using the coasters for a couple months, the felt is still holding up on the bottom.Great buy!

Perfect for adding a design to a tshirt for a pebbles flintstone costume. Easy to cut with regular scissors, flexible so it wasn’t stiff on the shirt, and smelled only a little (aired it out over night and was fine). looking forward you using again for another project.

"Caydo 10 Pieces Black Adhesive Back Felt Sheets Fabric Sticky Back Sheets, 8.3 by 11.8" (A4 Size), Self-Adhesive, Durable and Water Resistant, Multi-purpose for Art and Craft Making "I'll be able to use this on some very Flat surfaces and it does have a strong adhesive.But, unlike the Description, the adhesive will leave residue if trying to reposition or remove it in any way.I needed it to line the bottom and inside wall of Custom made Round Aluminum Cans and I know first hand it's not the easiest thing to do considering the shape I'm dealing with.Even with thicker felt with some body to it, it's tricky to apply, but I've done it before without any major problemThe problem with this Felt is it's Very THIN making it very difficult to handle and apply and couldn't even line the bottom of the can with a simple round shape of this felt without ruining the piece of Felt.Although not quite as thin, the Felt itself is like handling facial tissue once you remove the backing paper to expose the adhesive.And once any part of it is stuck to something, and try to re- position even a small area, No Matter How Careful You Are, it will Stretch out of Shape beyond repair with only the Slightest bit of effort.I would give it 2 Stars but gave it 3 because it can be used for some things, and know my specific application is not the easiest even under the best conditions.So IMO, make sure you can use this depending on the level of difficulty with the shape you want to apply it to.Hope this helps.

Bought this felt to line the bottom and inside of a portable dice tower/courtyard combo that I 3D-printed. The original purpose was to protect the dice and the tower from chipping each other over time, which I'm sure it'll do, but one unexpected benefit was how it made the dice rolling almost completely silent despite the felt being only ~1.5mm thick. It was surprisingly easy to cut, and stuck well to the surface (wood PLA sanded with 220 grit) - even when I occasionally had to take it off and stick it on again to reposition. The felt ended up being one of the highlights of the project, and I'd happily use it again!