Brass Foot Valve, 2 inch NPT Spring Mesh Check Valve Female Connection One Way Foot Valve Backflow Preventer with Holes Strainer Filter(2'' NPT)

This is a high quality foot valve and a good value. It's been used on a pump that draws from a muddy water source. It never failed, despite being neglected and abused.

I bought a Harbor Freight two inch semi-trash pump to drain excess water out of my 21 foot deep cistern. The intake hose had a standard open strainer on the end. The first time I used it, it took almost an hour to prime that pump, trying to fill that two inch hose and lifting the water 16 feet vertically. Because I had to repeat that about every month, I dreaded doing that again. So, I got the idea of putting a two inch foot valve on the suction end of the intake hose instead of the standard strainer. I put the hose in the well and positioned the HF pump. I used a garden hose to fill the 20 foot intake hose, attached it to the pump, filled the pump housing with water, screwed the filled cap in and started the motor. Hallelujah!!! Water started flowing immediately at full force! And it kept its prime when I stopped the pump and restarted it later! Great product! Saved a LOT of time!

Works good and solid

The best foot valve I've ever bought.

good

I used this to clean out my well. It is great and did a very fine job.

Durable. Worked as intended. No pronkems.

Holds prime well, even after a month of not using.

Works as hoped. Installed this at the end of intake hose at the bottom of my shallow bore (replaced different type of foot valve). Pump now holds its prime perfect!

Innengewinde nicht EU Norm

Well built, worked fine

Water had been leaking past my old foot valve causing me extreme grief. All is “well” now.

works great