Room Divider 6FT Portable Room Dividers and Folding Privacy Screens, 102'' W Fabric Divider for Room Separation, 3 Panel Partition Room Dividers Freestanding Wall Divider Screen for Dorm Studio Office

This room divider is very easy to fold and unfold and stores neatly in the corner of the room when I'm not using it. It's also very easy to assemble, so much so that I as a totally blind person was able to figure out how to put it together with no help at all and no use of the instruction sheet. Instruction sheet is mostly pictures so wouldn't work for me. The base is very stable.

Easy to put together once you get the first panel done. It came with a fair amount of parts so I was nervous at first but found it to be rather straightforward after the initial panel was done. It's been about a month and it's still holding firm with no issues. It seems to be good quality, I was impressed with the fabric panels. I expected cheap, but these are well-sewn and decent-weight fabric.

I'm reviewing this as I assemble it.Couple things:1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.NOW on to the utility itself.1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.

I Like this divider, its light, portable, and the legs, due to their flat design, keep it stable. For the money, you can't beat it.

Works awesome and easy to put together and clean

Nice when set up indoors. The material was pretty decent.

Overall it functions and will do the job I bought it for.However there were some challenges in assembly and I had to redrill a set of holes before it would go together correctly.Specifically, the joint in the middle of the upright was sized before the finish was applied and required quite a bit more force than expected to slide together, resulting in a significant amount of the finish being scrapped off inside the joint. Not a big deal, but unexpected.The real problem was that the hole for the snap lock at said joint was on the wrong side of the pole with respect to the dimple for the crossmember mounting screw. Had I left it as it was when it arrived, I would have had the screw at one end going through the pole backwards in order to seat correctly. I resolved the issue by drilling a second hole at the joint so that I could rotate the halves and have the crossmember screws going through the same direction at both ends and still seat correctly.

We needed something to knock down the cold air when the door was opened, and it did. As a bonus. It also is an excellent room divider for privacy. Quality materials and easy to put together.

I really like the final look, materals both clothes and poles are well built.P.S. you will need a power drill with a bit and a pair of gloves to assemble the divders together, do not think you are able to put it together with bare hands and a normal screwdriver..