Question 1

What parts are included in the kit? does it include Sand Paper also?

Accepted Answer

If I remember, it might have a razor blade, the primer-wipe, and adheasive.  I used my own sandpaper to scratch-up of the aluminum mount that goes on the window. Be sure to clean it well with 91% alcohol, and re-wipe the window, and aluminum off.  You may even want to use DAWN dish soap mixture and clean/rinse/clean/rinse well.  Also use a hair dryer carefully to dry out the pours of the window and slightly pre-heat the window before using the primer and glue.  If you don't do all of these tips, then the mirror will fall off in a few weeks like happened to me!    2nd time as stayed on for about 3 yrs now.

Question 2

instructions for using permatex to install rearview mirror

Accepted Answer

****THESE PRODUCTS HAVE AN EXPIRATION DATE**** Use within 2 years.  See step #6 below.O.K.....my Permatex (Professional Strength #81844 failed within a few days.  I just spoke to Kurtis at Permatex Technical Assistance who said the directions need and will be redone on all the newer products packaging due to the high failure rate of these "Rear View Adhesive Kits".    My failure was due to the glue not sticking to the metal button but did stick to the window.  He said to follow these instructions:#1.   Scrape old glue from window.#2.   Use rubbing alcohol 70% or 91%.  Then clean with some weak Dawn soap and/or just use water to clear the pours of the glass of any residue from the alcohol, then dry with a paper towel.  I asked him if a hair dryer could be used to dry up any water inside the glass and he said yes, but then wait for the glass to come to room temp again before using the primer.#3.  Clean the metal button with alcohol first, then use either a wire wheel to scratch up the metal button or get a piece of 400 grit sand paper and place it on a flat surface (to keep the button surface flat and true) then rub the button over the sand paper either back/forth or in a circle to really clean the button and put micro scratches in it, then clean the button with alcohol well, and then again with water and dry it...maybe again with a hair dryer to evaporate all moisture.#3.  Apply the primer to the glass ONLY!  The primer is a copper ion activator/catalyst that impregnates into the porous glass and will react with the glue, but ONLY apply it to the glass since it will react negatively with the metal button.#4.  Wait a 2-3 min. for the activator to dry on the glass.#5.  Apply a drop or 2 of the glue to the metal button and press onto windshield and hold it until it sets.   Wait 24hrs to mount the mirror.#6.  ****Most importantly***** THESE PRODUCTS HAVE AN EXPIRATION DATE.  The exp. date is only on the activator pack.  It is a 7 digit number imprinted on the pack and it is the first 2 digits you need to be aware of.  The 1st digit is the last digit of the year and the 2nd digit is the month but is represented by A-L, and A= January, and L=December.  Example: 1A34567   "1" = 2011   "A"=January   Only use if it is 2 yrs old or less.I hope this helps everyone and hopefully Permatex will update these instructions.Please call 1-87PERMATEX (1-877-376-2839)

Question 3

What language is this on the package?  It is not English.

Accepted Answer

Part of it is in English

Question 4

Do you think this will hold a chrome door handle that came loose on an SUV?

Accepted Answer

I would say no. We followed the instructions very carefully, including making sure the outside temperature was in the correct range, and our rear view mirror fell off again within a few hours.

ASIN	B000BKC2D2
Auto Part Position	Right
Automotive Fit Type	Vehicle Specific Fit
Best Sellers Rank	#66,906 in Automotive ( See Top 100 in Automotive ) #108 in Body Repair & Restoration Adhesives
Brand Name	Permatex
Color	Factory
Compatible with Vehicle Type	Car, Truck, Van
Customer Reviews	4.0 4.0 out of 5 stars (2,543)
Fit Type	Vehicle Specific Fit
Global Trade Identification Number	00686226818447
Included Components	Permatex 81844 Professional Strength Rearview Mirror Adhesive
Item Dimensions	0.44 x 3.18 x 6.5 inches
Item Type Name	Permatex 81844 Professional Strength Rearview Mirror Adhesive
Item Weight	9.07 g
Lens Curvature Description	Flat
Manufacturer	Permatex
Manufacturer Part Number	PX81844
Manufacturer Warranty Description	Warranty
Material Type	Plastic
Model Number	81844
Mounting Type	Windshield Mount
Number of Items	1
Number of Packs	1
OEM Equivalent Part Number	81844
Operation Mode	Manual
Other Special Features of the Product	Waterproof
Shape	Rectangular
Size	No Size
UPC	686226818447
Unit Count	1 Count

Permatex Professional Strength Rearview Mirror Adhesive

Details

Details

Description

Specifications

Common Questions