Kenovo Dura Trax Horizontal Bike Hooks

it's a great bit of kit and even comes with the required length of track.Fitting the track isn't too hard at all and only a very basic DIY skill is needed. You'll need a drill, correct drill bits (small pilot and main drill bit with correct size and for right material), spirit level, marker pen and a screw driver. All required bits to fix are included, even the plugs, screws and Instructions are in the packets which work for masonry or plasterboard walls.Hold the track where you want it making sure the height is right for saddle and handle bars as they are higher than the frame, drill a hole one end, loosely put one screw in and rotate the track level, use a spirit level to align and mark out the holes. Drill the rest of the holes and screw track in place. Put plastic cover over the top edge and give the bottom a good wack to click it into place. Clip the bike hooks over the track and put the bike. It really is as simple as that.I had considered extra screws but was genuinely surprised how firm it felt once attached to the wall.I have also bought more track and other accessories and really recommend the system as a whole, amateur fitting for a professional look.