5.8Ghz FPV Monitor DVR 7 inch Field FPV Wireless Diversity Receiver Monitor Black Pearl RC801 High Brightness HD Display 1024 x 600 Screen Monitor with Battery(RPSMA ANT)

It looks like it says it comes with a DVR, but no - nowhere to stick an SD card, or menu options (menu access via a click on the power button while on - something I had to work out for myself.) Instruction manual is vague, but not terrible - at least it mentioned there was a menu.It also came without a UK plug, but one of those Euro 2 pin mains plugs. Putting a proper 13A plug on it meant it won't all fit back in the tiny box it came in. Advertised battery is 1100mAh, but is says 1000mAh on the included LiPo battery pack itself. Battery life is woeful at about 20 minutes from 3 hours charge on the supplied adaptor. Sun-shade seems rather fiddly and prone to disaster and I can't make out the markings indented in the buttons. The splash screen looks awful - as if the Manufacturer just doesn't care.BUTScreen itself is bright and the two receivers do seem to be switching for the best signal - there are blue LEDs underneath them. Lots of outputs and wide power input range. It picked up my camera with no problems and picture quality is good, without too much interference. It is pretty much limited to line of sight though.Maybe I'm being a bit salty for the lack of DVR (direct from camera would be better anyways), or the non-UK plug, fiddly buttons and awful battery life, but for the price (£135.99) I was expecting better build quality and bag or case for storage and transport.Worth posting this review for the hilarious response from the seller ->>>

This is an amazing product, really well packaged and built and works really well.The Good:really nice compact size including a protective flip out sunshadeclear crisp imageHDMI InputMultiple AV outputsCharges from standard DC jack with a wide range of input voltages.The Bad:in NTSC i lose a fraction of the right of the image (some letters on my quads OSD are missing which show up fine & centralized on my fatsharks)in PAL i lose a fraction of the bottom of the image (the entire bottom line of my quads OSD only shows the top half of the letters which again show up fine & centralized on my fatsharks)This only a tiny bit of the image that is missing, but still it's the only issue I have and support have been fantastic and more than happy to buy flysight products again.I have a few quads, some NTSC and some PAL.. its a bit of a pain to need to switch them, would be better if this was automatic.. also nice would be an auto search button.. hopefully these could be added in a future version.. these features would make it easier to spectate and flip through different people's quads at races etc. (Manually selecting channels then flipping between NTSC/pal makes it slow)Add these features and I'll buy the new version too!But as it is it's a brilliant product.

I've had two of these fpv monitors now the first one was a returned unit because when I opened the box there were finger prints all over the screen and deep scratches on the back of the unit as if it had been dropped on a hard surface.The second monitor turned up and the box was properly sealed from factory but again when I open the box the screen had finger prints all over it..I powered up the monitor and immediately noticed that there was a problem with the LCD screen there were blotches all over it and when u attempted to push any buttons the blotches would jump around the screen.If you are a person who loves to be disappointed then go ahead and buy one..GOOD LUCK..I would not even give this product one star but unfortunately Amazon would not allow me to...

I don’t know what’s worse. A flysight camera or this monitor. It only worked with the camera right next to the monitor. As soon as I walked away with it all I got was snow. Absolutely useless so I returned it.

Brilliant so easy to operate .