1/4 3/8 1/2-inch Drive Click Torque Wrench, 3Pcs Torque Wrench Set 20-200ft .lb, 10-110ft.lb, 10-170ft.lb ,±3% Accuracy, 72-Tooth Dual Scale Torque Wrenches for Bike, Moto, Car Repair Maintenance

I bought this for my Granddaughters car in case she got a flat, works perfectly for her so she doesn't have to use the tool that came with the car and she is able to torque the lug nuts down. This tool (for the price) works just as good as the $159.00 one I bought for my car years ago.

everything arrived, high quality

It was a great shopping trip, even if it was the first time I placed an order in this store, order arrived earlier than expected and well packed. No damage and correct item as specified. This is reasonably priced. Perfect torque wrench(Uyecove), easy to read and use. Good quality. Hope to use it longer. Thank you Amazon for your timely response. Perfect customer service! More power to and your team!

Seems to be a nice set of torque wrenches so far. I checked the accuracy against other torque wrenches I have, click, beam and digital (I know all are accurate), and all 3 of these are within spec so far. I'll check them again in a couple months after some actual work. I just tested each of them on some bolts and the 1/2 Dr. on the lug nuts on my van. These barely have an audible click to them, but you should be using them by feel anyway. If you want something audible, by a digital wrench as they usually have an audible tone as well. The performance of this wrench I suspect is going to be pretty good since the "break over" (when you feel the click) is definitely present. Appearance wise, they're actually almost too pretty! Although the colors and sizing makes it easy to pick up the correct wrench. You certainly won't grab the 1/4" drive wrench by mistake as it's considerably smaller than the other two. I do like the locking collar, so far. I'm used to the knurled handle and the lock that you "twist" or screw in to lock at the bottom. I don't like that the set doesn't come in a case, but rather some kind of foam thing. But it still fits in my tool chest. Overall, I recommend, so far.

Used it on the day it was delivered. I cannot verify its accuracy but I believe it works as it should. Ez to adjust and has a nice noticeable click. So far very satisfied.

Just had to replace a cylinder head and my crappy short torque wrench was clearly not up to the job. This one adjusts smoothly with finely machined parts and markings. Locking collar worked well. I’m a strong guy and could barely even apply enough pressure to get the head bolts in 100ft lb plus a full half turn past that. Realistically, I should have use a breaker bar for the final 90°, but it worked impressively. Keeping this one.

looks good works well comes with a calibration certificate

I’ve only used one time so far, but the twist dial is easy to adjust and read, the quality feels very good, worked great for my project, and they also look really nice as well

I bought the red one so it stands out from my other silver tools when I'm working on the car.The locking ring is an improvement over my 20+ year old torque wrench with the locking bolt at the end, but I still have to hold the ring down while turning the handle to change torque settings.The best feature is the improved markings that look like they were laser marked. I have to squint a lot less (than my old torque wrench with stamped markings) to be sure I have the correct torque setting.The direction lever still points to the opposite direction that I want to turn, same as my old Made-in-Taiwan torque wrench.It comes in a handy foam holder that fits perfectly in my toolbox and would work well in any larger toolbox to keep it from rolling around or getting buried under other tools.

When working on plastic intake manifolds its a must to have this tool in your tool box .When you need to tighten a manifold at 59 lbs Inch you must have one of these .This one works great and I think its precise , did not have another brand to compare .This one is just right for the price , it looks to be of great quality regardless of its price !

All in all I am a bit disappointed. The pictures of the product showed a 1 inch to 3/4 inch socket adapter included with the torque wrench. The product was not delivered with this included. The image also shows a wrench with a rating up to 1200 ft.lbs. This should be updated as the description says 1000 ft.lbs. The latter is correct.The wrench apprears to be reasonably well made for the price point. It is not a fine tooth ratchet and i am glad the tooth count is mentioned in the description. This way i knew what is was getting. 24 teeth means one tooth per 15 degrees of rotation. On a 6 foot wrench that is a lot between clicks so if you find yourself in a tight place it will likely not be for you.The ratchet mechanism did not function well at first. It would rachet in one direction and freewheel in the other. I took the head apart and found the mechanism to be bone dry. After adding a bit of lithium grease and reassembly it is now functioning correctly.I'll be buying a seperate socket adapter as i currently have several 3/4 sockets that i want to use.Hopefully, the torque wrench will be reliable over the long run. I do not turn wrenches for a living so it will see limited use. But, when i need it, i expect it to bring it's A game.

Works well nice size

I was very pleased with the quality and it's made in china. I recommend this wrench and a great price.thanks Mel