MonstrumPro Series 7075 Aluminum Scope Rings

I recently equipped my AR platform with the Monstrum Pro Series 7075 Aluminum Scope Rings, attaching a Leupold Vari X-III 4.5x14 scope with a 50mm objective. Here's my comprehensive review of this setup:Build Quality and Material: The first thing I noticed was the exceptional build quality of the scope rings. Made from 7075 aluminum, they strike the perfect balance between lightweight design and sturdy construction. This material choice ensures durability without adding unnecessary weight to my setup.Mounting Stability: The mounting process was straightforward, and once installed, the rings provided a rock-solid grip on my Leupold scope. There was no slippage or movement, even after multiple rounds and recoil, which speaks volumes about their stability and reliability.Compatibility and Fit: The rings perfectly accommodated the 50mm objective of my Leupold Vari X-III. This precision in fitment is crucial for maintaining the accuracy and performance of the scope, especially on an AR platform where every millimeter counts.Alignment and Accuracy: Post-installation, I found that the scope maintained perfect alignment. The rings ensured that the scope's elevation and windage adjustments remained precise and accurate, which significantly improved my shooting experience.Aesthetic and Design: Apart from their functionality, these scope rings have a sleek and professional appearance. They complemented the look of my AR platform and the Leupold scope, adding an aesthetically pleasing element to my gear.Overall Experience: Using the Monstrum Pro Series Scope Rings has been an absolute pleasure. They've exceeded my expectations in terms of ease of installation, stability, and overall performance. They have enhanced my shooting accuracy and made my AR platform setup feel more professional and reliable.Recommendation: I highly recommend the Monstrum Pro Series 7075 Aluminum Scope Rings to any firearm enthusiast looking for high-quality, dependable mounting solutions. Whether you're a competitive shooter or a recreational marksman, these scope rings are a fantastic choice for ensuring your scope stays secure and performs at its best.

This is not my first product made by Monstrum. I currently have several Monstrum scopes and red dots and in general I really like their design and build quality and I did not have a single issue with their products. So, I was expecting the same quality level from this scope mount, and it did not disappoint me. This mount looks very similar to the Vortex pro series scope mount, but it costs exactly 3x less. It is perfect for mounting telescopic optics onto flattop style AR-15 rifles. The mount positions the center of the rifle scope tube at a height of 1.20 inches (30.48 mm) from the base, which is the perfect fit for my Vortex Viper PST 6-24x with a 50 mm bell scope mounted on a RPR (Ruger Precision Rifle). The high rings are perfect if you want to stay as low as possible without touching. I like to get the scope mounted as low as possible.The build quality seems to be excellent, it's on par if not better than Vortex products' quality in my opinion and at a fraction of the cost. They are not as heavy as Vortex ones, weighing only 107 grams (both), but look and feel rock-solid. I didn't have any alignment issues with the rings, and the manufacturer states that there's no need to lap the rings due to precision machining. From my experience, it's absolutely true, but I'd still expect that some people, being very particular about the scope fit, are still going to lap it a bit, which is totally unnecessary. In my case, they were matched ideally and good to go out of the box and didn't need any lapping (I still did just to be sure). Sturdy and locked in tight with no movement. The only feature that I'm missing in the scope rings setup is a quick release mount. But this is a very solid and stable scope platform, and for the cost you can't go wrong.I would also like to note that they are made of stronger 7075 aluminum and have two screws on the Picatinny clamp for guaranteed secure mounting. End-to-end, they seem to provide a rock-solid mounting platform for even the heaviest and largest long-range scopes and will withstand high caliber recoil with ease. Great rings!*** TL;DR ***Yes, I definitely recommend these rock-solid scope rings. They are very lightweight and low profile, allowing you to mount a scope at 1.2 inches height, which is perfect in my configuration for LR scope, and allow me to bring the scope axis as close as possible to the barrel. Its build quality is superb and on par with top brand names like Vortex, Burris, Bushnell, etc. The only thing I'm missing is the QD mount. But for the price of this scope mount, I'm not complaining at all. Solid 5 stars.+++ Pros +++1) Precisely machined, no lapping needed.2) Very low profile, only 1.2" from the base.3) Extremely lightweight, only 107 grams.4) Double screws on the rail mount.5) Made of 7075 aluminum, extra strong.6) Matte, non-reflective finish.7) Perfect for flattop style AR-15 rifles.--- Cons ---1) Not QD mount.

I am using these scope rings on my Springfield 2020 .22 rifle. These rings are light in weight and leave no doubt about the quality of the material. The rings are two screws on each side and are long enough to allow easy mounting and fitting of the scope. I was very impressed by the size of the rings and the quality of the material.

Design is great, materials are listed as excellent - so strength should be fine. Torx t25 heads on all bolts - very nice. Came with wrench for bolts. If anything is weak it might be the finishing. Rings seem like they'll chip easily - has that chalky feel vs the slick feel of the coatings that tend to hold up best. When I de greased the bo!ts in alcohol the alcohol turned blue. Thought that was weird. Torque settings listed under the bottoms of bases. I think they're great for the money spent. I like that they're made of 7075 aluminum. Went on a 7.62 russ self feed rifle, so it'll get a work out. Again, bolts seem great. Nice and big. I'll give them a five star. Can't imagine what could make them fail. If they do, I'll amend this review.

Good fit and finish. Easy install and Sturdy. They are great rings.

I bought the 30mm/low model of these rings. I like the design, and the picatinney clamping interface works very well with the EGW pic mount on my rifle. The lapping of these rings took longer than usual to get an 80% fit. Part of this has to do with the material and hard anodizing on these rings. But the other part is that these rings are not made to the same standard as rings costing 2 to 3 times as much. Still, with lapping, I expect these rings to be quite serviceable on the platform on which I installed them.

Purchased these rings for my custom 22 creed and while tightening them to manufacturer specs with a wheeler torque driver, the sliding clamp ripped, rendering the rings useless!! Biggest waste of money. Save your money and buy from a major brand!! Because I was outside the Amazon 30 day return policy the seller won’t help with the issue. I contacted the manufacturer and they do nothing for international customers. So I’m out $100 for a set of broken rings.