FNIRSISoldering Iron Kit, DC/PD(96W/65W) Mini Digital Soldering Iron, 180-780℉ Fast Heating, 6 Soldering Tips, Digital OLED Screen Display, Auto Sleep(NO Power Adapter)

The temperature control and screen seem like they would be overkill, but it's actually very useful to be able to dial in an exact temperature and see whether it has reached the target temp. It also automatically shuts off after a certain amount of inactivity. This is great for not having to worry about burning my house down.Having used the cheapest low-end soldering iron for years, I was amazed at how quickly this one heats up. With the old one, I would have to turn it on and do something else while waiting for it to get hot enough. This one is fast enough that I don't feel the need to switch tasks while waiting.Another nice thing is that it is able to accept a range of USB-PD power sources. Lower power chargers simply cause it to heat up more slowly, but you can still get work done. So you don't have to stress out too much about getting the correct charger to make this work.My only gripe is that the pad you grip could be better. It is too small and doesn't feel "grippy" enough. I would have preferred a more squishy kind of rubber to be able to get a better grip. That, or more aggressive knurling (or whatever it would be called in rubber). The body of the iron is smooth and looks cool, but I wish it was also easier to hold. None of the grip problems have led to me dropping it or accidentally touching the hot part, though.Another issue that's more a matter of using USB-C in the first place than anything specific to this iron is that USB-C cables, especially the thicker ones which can carry a lot of power, are fairly inflexible at the end. This means that the cable will pull on the back of the iron more than I'd like. There might be other cables with more flexible ends or something I could do with a holder contraption to keep the USB-C cable from pulling, but it is worth mentioning.

Fnirsi designed a great tool for a great price. I purchased this item without the power supply as I planned to use this as my field fpv repair kit. The tool will run off XT60 to DC adapter (Same cable used for powering DJI goggles with Lipo/LIION packs). Off a 4s lipo, the iron gets max hot in less than ten seconds. The tips are replaceable at affordable prices and good quality. With proper use, I imagine the tips will last as long as expected. I got good run time using a 860 4s lipo, probably 30 or so min constant. i usually turn off the iron between uses since it heats up so quickly, the battery and tips will last much longer this way. The manual is easy to understand and available in a variety of languages. I recomend reading the manual before operation. There are subtle nuances that will go overlooked if you just start fooling about. For instance, the iron won't work unless you install the tip as the manual suggests and there is a ton of features, but only two buttons. Read first, it won't take long, and you won't regret it.

Heats quickly, small size so it handles very well

Reasonable build quality, nice OLED screen. iron tips are decent quality. Iron comes with one #2 chisel tip along with the other 5 in the kit. Two of the tips are blade tips which I won't ever use.I paired this up with a cloth braided type c cable (don't use silicone cables.. they'll work fine but with this device being in your hand, it grip and grab and snag your clothes, not safe!) And an Anker 65w gan adapter and it really does get to max temperature in less than 10 seconds. Really impressed. Also comes with a type c to barrel adapter so you can use a 12v adapter, a lithium battery, or maybe even a 19v laptop adapter (I didn't try the laptop adapter but it may work). Used it to solder some connectors on some LMR400 coax in the field and it worked great. Highly recommended.

When powered up, and button pressed to start the heating, the soldering iron resets. It won't heat because it is always resetting.Bottom line, it doesn't work

I find myself packing this in a little tool kit I take to the lab, and finding reasons to use it. The tips have been fine (no premature oxidation) and the responsiveness of the heating element is great. Highly recommend — I use it more often than my Hakko station now.Make sure the USB-C PD brick you get is high enough wattage, and get a silicone USB-C cord!

Had a problem with the first item but it was quickly resolved to my satisfaction.

This little baby is good looking, good feeling and GOOD WORKING!!!! AND TALK ABOUT FAST!!!! ILOVE IT SO MUCH, I BOUGHT THE BLACK ONE TOO, CAN SHARE TIPS + SPARE PARTS!! AT THIS PRICE, SECOND ONE IS INSURANCE WITH BENEFITS!!!! ;*) Great with Anker SILICONE C - C cable AND good 100w, battery bank, or 65w will do!! SOLDER ANYWHERE!!!! DO IT!!!!

funcionó 1 semana, de maravilla, después sólo entró en Bootloader mode y no volvió a funcionar .. la empresa no contestó mis mensajes y/o correos, nafasta actitud tiempo y $$$ perdido NO TE ARRIESGUES

Heats up within seconds, digital readout, replaceable ceramic heating unit, solid but lightweight feel, temperature setting in 5 degree steps, etc. Will never use anything else.

Great portable soldering iron. There are two versions of this product, one comes with the power adapter and the cable and the other version don’t. I got the one without the power adapter and cable. At first, I had hard time finding the right adapter to power up the iron. I tried both of my own Ugreen 65w and 100w GaN fast chargers, but they don’t supply enough power so the iron couldn’t reach its operating temperature. Then I learned there are many different USB PD charging protocols and different charger may support different protocol. Maybe that is why it didn’t work.Finally, the customer service set me up with their power adapter and cable and the iron worked perfectly. So with that said, get the soldering iron that comes with the power adapter and the cable. It would save you some headaches. Great customer service!

Ich war auf der Suche nach einem handlichen Lötkolben, dessen Spitze nicht mit PE verbunden ist, und bin über dieses kleine Ding gestolpert.Ich war skeptisch, ob er meinen guten alten ERSA TIP ersetzen könnte - und er kann !Ich verwende ein 65W USB-C Netzteil. Zudem habe ich eine große Powerbank mit 80W bestellt.Der Kleine kommt extrem schnell auf Temperatur. Das Löten ist angenehm. Selbst 2,5mm Drähte sind kein Problem.Wie lange die Spitzen halten kann ich heute noch nicht sagen. Ich würde hier nochmal updaten, falls etwas unschönes auftreten sollte.Update nach 3 Monaten:Display zeigt nichts mehr an, der Anbieter ist nicht erreichbar. Und wieder lacht sich der Chinese ins Fäustchen.Der alte Ersa läuft und läuft und ich habe ihn wieder lieb.

Honestly it is the best iron I ever had