– Metolux Metoset Concrete Repair Resin - Grey (480g) for Repairing Cracks and Sealing Joints, Strong Mortar Repair Ready to Use Cement Filler Suitable for Indoor & Outdoor use

After doing some research on the best product to repair cracks in render, I came across this product. It seemed ideal as it sets hard, is water resistant and is not flexible like other solutions. I was a little nervous about the working time of 10 minutes but it was really no issue and I had plenty of time to apply. The overall finish was excellent. I was able to rub down the surface after it had begun to harden making it invisible once painted. The finish was much better than expected and that I have seen on other repair jobs on other properties. Main pros: - hard, solid finish - completely paintable - fills deep and wide cracks - screw the lid on to use another time and comes with two nozzles - hardens quickly - do the job well once to last for years kind of feeling Cons: - can’t leave more than 10 minutes at a time otherwise it will harden in the nozzle Will 100% use it again even though it might be considered a bit pricey. In my opinion it is totally worth it for a solution that will hold for years to come.

I am currently working on my front windows which consist of Victorian frames set in sandstone. Modern double glazing units have then been installed into the ancient frames. The gap between the wooden frames and stone is failing so I raked it out and looked for a modern stone filler. This stuff is amazing. It consists of two separate ingredients held in plastic bags within the tubes and the nozzle has a mixing spiral included. It pumps in very easily, 'goes off' in about 5 minutes and is extremely hard and stable. I have bought 6 tubes and am using it for a variety of repairs. Highly recommended.

I had cracks in wall render, widened these with an angle grinder, ready for filling. This product is a two pack epoxy type product that mixes as it comes out and feels a little flexible and not cement as imagined. It does go off quickly - be warned. You need to fill crack, use a spatula to press in and I found a paint brush dipped in water helped even everything out. Did the job well, but you need to be quick

Does what it says , easy to use and drys quickly

This is really good for repair to cracks on render. Use angle grinder to open up the crack both wider and down to the brickwork below. Then apply this and match finished texture . Used it 18 months ago and still looks good.

Fantastic product and is supplied with two mixing nozzles. These ingenious nozzles have a built in spiral that mixes the (2-pack) contents of the tube as they are squeezed from the tube. From my use - admittedly here on the chilly N.E Scottish coast in late autumn (!) I would recommend that the tube is placed in a WARM oven (not hot) for 10-15 mins immediately prior to use. This softens the 2-pack tube contents and makes it much easier to dispense. A geared tube gun also aids significantly with dispensing. Note that you do have to work fast with this stuff as it hardens pretty quickly.

It was easy to use and dried super fast but it didn’t go very far. We wanted to seal some cracks on the concrete driveway but it run out before we could cover all the cracks . So it works out quite expensive that it run out before being able to complete the repair . Also colour was a lighter grey and drive is a darker grey so it will need painting for the repairs to not stand out . I don’t know if it came in a darker grey .

What a brilliant product. Used to fill cracks in walls and pin bolts in to concrete. Easy to use, just make sure you do a lot of filling in one go as it sets super quick and will dry up in a part used tube