Description
- IR INFRARED DETECTION TECHNOLOGY: Our smart-motion infra-red sensor technology provides a sanitary, no-touch and easy-to-use operation that will only be activated when needed (Put your hand under the sensor to let the dispenser start to work), Don't need to wave your hand multiple times. Washing hands without else dirty; Sensing Distance 0-3.1 inch (0-8cm), Sensing time:1-2s.
- 3 LEVELS ADJUSTABLE SOAP LIQUID VOLUME: The auto hand soap dispenser comes with 3 different settings to adjust the amount of soap you want dispensed, No dripping or trailing, once for a Level (1.5 seconds, 2 seconds, 2.5 seconds); NOTE: For liquid flow out more smoothly, make sure no particles etc. which may block the soap nozzle.
- HIGH-FOOT BASE FRAME: The Fingerprint Resistant Auto soap Container Comes with the base frame design is to prevent battery compartment from getting soaked in water which could cause corrosion and the soap dispenser fail to work; This Hand Free Soap Dispenser designed with the stainless steel material, New Waterproof, Moisture-proof and Leak-proof Technology Prevent the Soap or Water to Corrode Circuit Board.
- APPLICATION OCCASION: Perfect for most decors and makes a smart choice for family, offices, School, Countertops, Decorative homes and restrooms,Toilet,Hotel, Clear Chamber,Deck Mounted, Restaurants, Coffee Bar, Kitchen; Great touchless sensitive dispense pump! You don't need touch it, just put your hand there and it will drip the soap, it will ensure your kids much easier for him to wash his hands or help kids who is not strong enough to press the regular hand soap bottle.
- NOTE: Please use the following steps to test your soap dispenser is working properly: 1. long press the switch button, until see the light flashes once, do not join the liquid at first; 2. put your hand on the "liquid outlet" below, the indicator light will light up and has the pumping liquid sound; 3. move your hand away after the sound stop, then the indicator goes out, at this point your soap dispenser is working properly; 4. please repeat the above steps 3-4 times.
How to set up the automatic soap dispenser?1.Remove the battery cover and insert 4 new AAA batterise(Not include) into the bottom battery compartment. Put the cover back.2. Please check the liquid soap machine is working properly before filling the liquid.3. Install the Waterproof base at the bottom4. Twist the container lid anti-clockwise, open the cover slightly, and then fill in the liquid soap, about three quarter of it,(Max. 8.5oz capacity). Close its cover.5. Turn ON: Press the top button 3 secs,the senor light blink,it is ON (the red light will flash twice).6. To adjust the soap liquid volume. Press the button once for a level, there are total 3 levels of soap liquid volume(1ml, 1.5ml,2.0ml).7. Put your hand(0 -3.1 inch) under the sensor to let the dispenser start to work(sensing time:1-2 seconds ).8. Swith off: If you wish to turn OFF the unit keep button pressed for 3 secs. (the indicate light off).specification:Material: Stainless steelSize: 4.73 x 3.14 x 7.48 inches Capacity: 280mlNet Weight: 10.2 ouncesInput Power: 4 AAA Battery (not included) Package Contents: 2 x Soap DispensersNote: (1) Please keep the surface of the unit clean, wipe the boby with mop regularly to avoid long-term corrosion upon the unit(2) Store manual in a safe place for future reference(3) Do not expose electronics under any circumstances. Do not attempt to repair the unit.(4) Do not wash the dispenser or soak it in water or flush it with strong flowing water.(5) Avoid direct sunlight to the infrared panel.(6) Please turn off the dispenser when you need to move it in case any soap flowing out.
