Spigen Magnetic Ring Plate for MagSafe Compatibility with iPhone Galaxy Pixel Cases - Carbon

I love these. I keep buying them every time I get a new phone or case. I've bought several for others so they can use my phone chargers and stuff. I think I'm going to buy a couple just to keep 'in stock' in case they go away or something. It's easy to apply them, the adhesive is strong enough that it's never separated, and the magnets are strong enough to easily hold up even the chunkiest of phones (my original Pixel Fold brick) while attached sideways in a bumpy car. Lined up correctly, it allows for wireless charging and NFC too, depending on your phone's support... check where your wireless charging "center" is before applying it to ensure it doesn't interfere. I tried some cheaper ones first, but usually the adhesive fails after not too many attachment/removal cycles. This one has the added bonus of having the 'alignment' prong, too, which is really nice for car mounts!

I’ve had this for over 6 months now, and it’s been a work horse. The Installation was incredibly easy, and I simply stuck it on the outside of my phone case, which isn’t MagSafe-compatible. Since then, I’ve been able to use it with my MagSafe wallet and easily swap it onto my dashboard for convenient hands-free use. The magnet holds really well and allows me to easily take my wallet on and off without any issues. The only time it doesn’t hold as securely is when the phone is dropped—the wallet tends to separate easily. The magnet isn’t the strongest, but it’s more than enough to keep my wallet in place during normal use. Overall, it’s been a reliable and effective solution for MagSafe compatibility!

The magnets work great. Not the strongest I've used, (Rokform) but really it's the perfect amount. I have an S23 and you can get it to stay on some metal objects. It snaps into position very well and actually holds on accessories and mounts. I love the look and feel of it. I did have problems with the installation. It's not very clear where to put the ring. I assume the very center, but on my S23 that's not even possible because of the camera lenses. I used a metric tape measure and just got it as close as possible to one of my cases that came with a MagSafe ring built in. It's probably because I used a textured case, and it recommends you don't use a textured case, but I had a hard time getting it to come off the installation plate. It could also be that the camera protruding keeps it from laying flush with the case. Once I got it on, it was holding very well with no issues. It would be nice if they told you the numbers to line it up on for each phone. Although using a USB insert with an alignment works better, it keeps the product from being up-to-date. I think Spigen's alignment tool is a happy medium. It wirelessly fast charges on my Anker charger. I haven't had it long enough to see if it gets hot, but it has on all my MagSafe cases, so I don't think that's a good way to gauge the alignment. Update: I've bought this multiple times for multiple cases. The first ones I bought the magnets were not as strong as the ones I bought later on. It's not a huge difference, but I can put the ones with the newer magnetic rings on my fridge and it doesn't slide down at all. Only the first two I bought slide down.

Grabbed one of these to use with a MagSafe compatible wallet and I was concerned that there were notices that it would not work on textured cases. I have a Motorola branded case for my Moto G Power 2026 phone and it has a fine texture on the back. I applied it according to the directions and was able to place it perfectly. I have been using it for 3 months or so and I have not had a problem yet. It works with all the MagSafe compatible accessories I've come across including my car mount. I must say I am extremely impressed with this product and I would recommend it to anyone looking for a way to use all the nice MagSafe accessories available to iPhone users. I can't guarantee that this will work with every textured phone case, but for mine it works perfectly. Also as a side note wireless charging does not work with this on my case because with the case and the plate attached it has too much distance from the charging surface.

First, I love Spigen products. I've been using their cases exclusively for years. This ring works very well -- strong magnetic connection. The slight protrusion from the back of the case isn't noticeable when other accessories are attached, and it can be helpful for gripping a larger phone (Pixel 9 Pro XL), providing a little extra bump out. The instructions are clear, and the installation process is easy. Two issues I have: - the straight extension piece from the circle doesn't hold very well, the glue is not holding. The circle, no problem - the positioning in the instructions seems to not put it in the optimal place for charging. Battery packs heat up substantially when centering the ring, per the instructions, and do not charge quickly. The Spigen Cryomax 3 seems to not have this issue, though. But I ended up replacing the case entirely with a Spigen case with the ring built-in, and that case positions the ring about .25" lower, and I don't have the heat issues that I did with this ring.

No merece la pena en absoluto; funciona bien y cero quejas, pero hay alternativas mucho más baratas que son prácticamente iguales.

Gemakkelijk aan te brengen, sterke magneet.

Installs easy, the magnet is strong. It's also stylish and adds a touch of style to my case, Spigen Sony Xperia edition. Spigen is a no brainer. Just works and lasts.

The Spigen Metal Ring Plate (MagFit) Compatible with MagSafe in Black is a product designed to enhance the functionality of your MagSafe-compatible device. To assess its value for money and best features, let's break down its key aspects: Compatibility: The Spigen Metal Ring Plate is explicitly designed to work with MagSafe, ensuring a perfect fit for your Apple devices. This compatibility ensures that it will work seamlessly with your iPhone or other MagSafe-compatible devices. Quality and Build: The product is made from metal, which not only adds a premium feel but also ensures durability. The black color adds a sleek look that complements your device's aesthetics. Easy Installation: One of its primary features is the ease of installation. You can attach it to your device or its case with little effort. The adhesive ensures a secure attachment without leaving any residue upon removal. Magnetic Strength: The metal ring plate enhances the magnetic connection between your device and MagSafe accessories. It ensures a strong and stable connection, preventing accidental detachment, which can be a common issue with some other non-MagSafe accessories. Functionality: It serves as a handy addition for various purposes. You can use it with MagSafe-compatible wireless chargers, wallets, and other accessories. This adds value to your device by expanding its functionality. Value for Money: The value for money largely depends on your usage and needs. If you frequently use MagSafe accessories or need a stable and reliable connection, this product offers a cost-effective solution to enhance your device's capabilities. Durability: The metal construction of the ring plate ensures longevity. It is resistant to wear and tear, making it a good investment for the long term. Design: The sleek black design complements the aesthetics of your device without being obtrusive. Customer Reviews: To get a better idea of its value, it's helpful to check customer reviews and ratings. This can provide insights into how the product has performed for others.

Great Spigen Magnetic Ring Plate Adapter for MagSafe. I got this for my Samsung Galaxy Note 10 Plus. Since there aren't MagSafe cases for these this seemed like the next best option. Great application system to put onto your case. Worked very well with my Sipgen Liquid Crystal Glitter Works Case. Extremely strong magnet! been using for 5 months with no problems. Awesome product and I would highly recommend it.