3D Printer 270x200mm/ 10.6x7.8 inch PEI Sheet【Double Sided Textured/Smooth】Spring Steel Build Plate/Flexible Steel Heated Bed with Magnetic Bottom for QIDI X-Plus/i-Mates 3D Printer

This is light-years ahead of the original build plate. I set the plate temp at 60c and use Flashforge PLA PRO filiment at 215c. Printed many things and after cooling they often SLIDE right off this plate by hand. Once or twice Ive had to slightly remove the flexible plate to pop it off but do it over something soft cause the model will come off so easy and fall. This thing is amazing and will NEVER again use the original build plate and slamming scrappers against the model to get it off and throwing off the calibration.Make sure the original build plate is clean and spotless before applying the 3M magnetic pad. Square the pad up evenly on one end of the build plate and only peel the paper off slowly as you work your way across the plate to avoid air bubbles. You will NOT get a second try in applying the magnetic pad as the adhesive is so strong once you get it on and started so work carefully. Also, they dont say this but 3M adhesive backing has temperature recommendations and in short, after you get the magnetic pad applied to the plate, set the plate temp to 90c for about 10 minutes. This really sets the glue. Place the flexible metal plate on the magnetic pad (its VERY STRONG). Then place a heavy object (I used a 1 gallon water jug) squarely on the plate to press the magnetic pad tightly down on the original build plate. Leave it for at least 24 hrs. The magnetic pad will NEVER pull off the original build plate now. DONT FORGET TO RECALIBRATE YOUR X Y Z AXIS due to height change from now having a slightly thicker build plate.The flexible plate has a rough side AND a smooth side. Your choice but I always use the rough side as the build side and it works fantastic. Models come off so easy and never have failed due to not sticking well enough - I always use a brim.Again, this thing was a total game changer.

Fits the CR10-S5 perfectly and seems to be great for adhesion. I had to level the bed a little higher than normal, but just a very small bit (after raising it to compensate for the removal of the glass bed).

Simple to install and works wonders! Wish I would have swapped this out sooner in my adventurer 3 printer this has made a work of a difference no more slicing fingers getting prints off the mat now they pop off perfectly with a nice smooth base

So far I love it. No issues..Well one issue. Not sure if this was supposed to peel off or not. Water got under it while cleaning the top and it just kinda fell off for the most part.so I removed the rest.

This came in the right dimensions, looks like a quality enough product. Functionally, it seems great. Good adhesion, prints don't tear off the coating... but... compared to other market leaders that sell larger PEI beds, this one seems like its missing a lot of "texture". There are bare spots between texture and the coating doesn't seem uniform. This does not seem to have affected its functionality, but it was odd to see large spacing between the grain texture.

I was having some issues with prints (PLA+) lifting at the corners or just coming completely off the print bed, and I also wanted a smooth surface so I gave this a try. Well, I can say the adhesion is CRAZY strong with PLA+ - amazing difference from the factory, textured plate from QIDI! I haven't tried PETG yet, I'm almost afraid to, I might never get the print off!

The plate does not have enough magnetic attraction to keep it secure during printing on my Prusa Mini. Tried twice with both prints failing. On the plus side, the filament seemed to stick nicely to the plate and was easy to remove. I am returning the product.

Fellow 3D printing enthusiasts, lend me your virtual ears, for I have stumbled upon what may very well be the Holy Grail of build plates. The 3D Printer PEI Sheet Spring Steel Build Plate is not just a mouthful to say; it's the pinnacle of printing platforms. Let's dive into the geeky goodness of why this build plate is a game-changer.First off, adhesion is the name of the game in 3D printing, and this PEI sheet-equipped marvel sticks the landing – quite literally. Prints cling to the surface with the tenacity of a Level 99 Wizard casting a Hold Monster spell. No more prints warping away from the bed like they've been spooked by a ghost in a machine. This is the kind of stickiness that legends are made of.But here's where it performs a magic trick: post-printing, that same tenacious grip transforms into a gentle release. Prints come off the plate with such ease, it's like they're levitating. No more prying, scraping, or swearing at your creations to get them to budge. It's as if the build plate whispers, "You shall not stick!" in the most Gandalfian manner as your print concludes.This spring steel plate isn't just a flat surface; it's a testament to the marriage of materials science and the dark arts of 3D printing. It's durable, flexible, and, most importantly, reliable – a trifecta of traits that any 3D printing mage seeks in their quest for the perfect print.In summary, if you're on a quest for the best build plate in the land of 3D printing, your journey ends here. The 3D Printer PEI Sheet Spring Steel Build Plate isn't just a tool; it's a revelation. Say goodbye to adhesion woes and post-printing struggles. This build plate isn't just a step forward in 3D printing technology; it's a giant leap for nerd-kind.

Excelente material, las piezas 3D se adieren bien, y no quedan residuos después de la impresión.

The PEI Sheets were garbage, so I returned them and still haven't got my refund from them.