ELIVED Long Arm TV Wall Mount for Most 26-65 Inch TVs, 37.4 Inch Long Extension TV Mount Swivel and Tilt, Max VESA 400x400mm, Full Motion Wall Mount tv Bracket Holds up to 77 lbs.

Nice mount, easy installation. I’m pretty sure the mount weighed more than my 43 inch TV. I mounted to a wood stud so I used my own (shorter) lag bolts. If there is any downside to this it may be that it is a little stiff for the final closing or opening. This is not a bad thing. I retract this mount from time to time but not an issue. Extends out pretty far if that’s your need. Good quality.

Comes with bolts, but might not have the correct ones for TV, this was installed with a Samsung 8 K TV and required a special bolt kit, Know ahead of time what you need. The holder is absolutely SUPER rock steady and will not let your TV swing, or sag, or jitter, wobble or any other negative. Absolutely, completely and delightfully happy with purchase at a very reasonable price. This mount has crazy good movement allowing it to swing into another viewing area, all smooth as butter, Even the most demanding person will be pleased, very easy to install, You will most likely need two persons to lift TV onto "Hook" but then you are done. (mount two easy security screws )

I installed mine on drywall and it was fairly simple. You'll need a drill and socket or ratchet wrench. My previous mount was similar so I knew what tools I would need in advance. It just comes with a small level and template so you can use to mark where the holes will go.I was looking for a mount I could install at a corner since I use my TV (42") as a monitor and have an L-shaped desk. At my new apartment, the stud is close to the corner so this worked perfectly. I haven't had any issues so far but, I should mention I don't move my TV around much. Once I got it positioned, it was good to go. I installed and hung my TV myself so while it had some heft to it, it wasn't too hard. I'd recommend it because it has decent range, it's affordable and is stable and solid. It also comes with adapters to fit various TV configurations. The instruction also tell you how to test stability before you hang your TV up

Every DIYer deserves a break from time to time. This was mine. The DIY gods were smiling when I chose the ELIVED long-arm tv wall mount. It's perfect for the oddball application I had in mind. First, you can't tell from the pictures, but it's a heavy-duty steel construction. Second, don't be intimidated; it's easy to assemble and set up. Follow the instructions. You'll be fine. Third, the 37.4 inch extension and 180-degree rotation let's me center the tv on the wall when in use AND swing the tv to the left corner of the room for storage when not in use. I like to think my superior knowledge and DIY capabilities made all the difference, but I'm willing to share some of the credit for my success with the engineers. Trust me, you're going to look and feel like a pro!

This is a heavy duty TV mount and I am using it for a 55" tv with no problem. The ONLY hitch was the plate extenders were confusing. We ultimately made a template of the back of the TV where the holes were and then in a Survivor puzzle mode, tried every combination until we found one that worked! Once the place was on the TV - installation was truly a matter of minutes. It is sturdy and I am very happy with the quality for the price.

I don't know what this should cost or what it should be like but for my purposes this is very good. I got the longest arm made here. Read the reviews everything seem good and was glad I purchased this. It gets rare. To buy something and be glad you bought it.This is very sturdy I'm using a medium sized TV nothing too huge or heavy but this is Rock Solid and I'm using it as full extension and it is just about perfect.*There are only two small screw holes where you would be bolting into a beam. I wish there was a couple more holes and there are no bolts provided for you to do that.*I feel like it would be helpful if there were sliders or something provided where you could mount the TV slightly higher or lower. You can put them out higher or lower but the monitor itself has only a single attachment point. I had to modify mine because of where the mount had to go I need the TV to be raised up. Modification was not difficult but it did require... well I only use the parts that were provided. But it got wild!So it's lacking a few things but what is provided is extremely useful and sturdy. And it's operates relatively smooth. Each segment is slightly smoother than the previous which is the way it should work for best operation.

Wanna watch tv from around the corner? This long reach mount can go the distance and partially around the corner if need be. Holds up to the weight of tv as well.

We purchased this mount to use inside our entertainment center. The product comes with a template for drilling the mounting skills. Out of the box the arm is difficult to adjust because the joints are tight. The directions state to use WD-40 on the joints after installation and its a must. We sprayed the joints prior to installing the arm to that we could soak them. Once installed, the arm moves easily. The adjustable backing arms allow you to adjust to the size of your TV. Once you put the backing arms on, you just hook the TV on the mounting arm and tighten the two mounting screws. Overall it took us about 30 minutes to install with a drill and screw driver.