🖨️ Elevate your 3D printing game with flexibility and finesse!
The 2PCS Flexible Spring Steel Resin Build Plate is designed for optimal performance with Elegoo Saturn 2 and Saturn 8K 3D Printers. Measuring 224x129mm (8.8x5.1in), this innovative build plate features a reusable, flexible design that allows for easy print removal. Its robust construction ensures durability, while the specially brushed surface enhances adhesion. Each set includes two build plates and magnetic bases, ensuring a seamless printing experience. Backed by a commitment to quality and customer support, this product is a must-have for serious 3D printing enthusiasts.
K**N
This should be shipped with every printer
These build plates are 100% worth buying! Save you so much time!
T**O
Good value for these plates
These plates perform just as well as the others I own from name brand makers. They come with high quality magnetic strips that are easy to install and provide a very strong and stable plate when attached. I have no issues getting good print quality. The prints seem to adhere to the plates with no issue so far. And the prints are so much easier to remove from my Anycubic Photon Mono 5s. My only complaint is they are a little small for my printer build plate.
J**N
Works amazing with AnyCubic 3D printer
Super flexible and very reliable. Saves me a ton of time trying to scrape off the 3D prints. I recommend getting a second one if you do a lot of printing
C**S
Makes things so much easier
My first print with this concerned me as the resin did not stick and it slid off during the print. The 2nd print did the same. I cleaned the plate with Isopropyl alcohol and the prints from there on stuck and I had no issues. Must of had some sort of residue on the plate after being manufactured.
C**N
Game changer
Makes 3D printing significantly easier. I love that I can bend the plate and all my parts pop off. Never used one of these before and I love it. Fits perfectly and magnetism is very strong. Layer adhesion couldn’t be better! Actually never had a failed adhesion with this
L**Z
Old Adhesive on the Magnet
This came in with no protection on the adhesive that attaches the magnet to the build plate. Whatever adhesive was there, was dry and not at all able to be used. Big waste of money
T**
Easy to use
Easy installation and use. Just sand the surface before using
J**R
Works great
I can print directly on the build plate now without the worry of not being able to remove the print. Make sure you print and install the shim so that the correct height for leveling is maintained.
W**A
Excellent Performance with Proper Preparation: A Must-Have for Resin 3D Printing!
I recently purchased this magnetic plate for my resin 3D printer, and I must say, I'm thoroughly impressed. As many have mentioned, allowing the adhesive to set for at least 24 hours, preferably 72 hours, is crucial. Also, cleaning the plate with isopropyl alcohol is a must. When you follow these steps, the performance is outstanding. Highly recommend!
Y**Z
Hasta el momento se ve bien esperare a usarla
Hasta el momento se ve bien esperare a usarla
ニ**エ
表面処理が甘いのか張り付きがとにかく悪い。
3Dプリンターの更新に合わせてサイズアップしたので購入。Elegoo Saturn 3 Ultraに使用。張り付きが悪く、剥離が頻繁に起きて作業にならない。表面積が広いもので試しても端は剥げかけてる。初期露光時間を調整し、現在40秒→60秒で試すも僅かな改善しか見られない。クリアタイプのレジンだと気持ちマシだかそれでも剥離しないとは言い切れない。フレックスじゃないと剥離が面倒なのでと思ったがとにかく剥げるので何度もやり直しさせられるのでたまったものではない。
M**I
便利、欠かせないツール
出力品を荒らさずにきれいに剥がしたいので、これがないと大変困る。これのお陰でプラットフォームは未だに傷一つ無いです。ものが傷つくの嫌いなので最初からこれを使って良かったです。ただサターン2のビルドプレートより両わき1センチずつくらい小さいので若干印刷範囲が狭くなる。ちょうどの大きさのが探せない〜(-_-;)
C**N
With the correct resin settings, flexing the plate pops my model off
popped this one right off after I applied correct resin settings, previously it did not work for me but it turns out to be my beginner error
Trustpilot
1 week ago
1 week ago