Geeetech TPU Filament 1.75mm, Shore 95A – Flexible 3D Printer Filament with High Elasticity, 1KG (2.2lbs) Spool, Dimensional Accuracy ±0.03mm, Fits Most FDM Printers (Black)

I had never used TPU for 3D printing before, but had read lots of stories about TPU being hard to print with, stringy-ness, susceptible to problems with moisture absorption, and so on. I bought a roll of the Geeetech 95a and gave it a try. I found that it printed quite well in my Bambu P1S right out of the package with no extra drying before use. It produced a few very thin strings, but nothing unacceptable. After the first session, I left the roll out for several days (my house is well air-conditioned) and then printed a few more items with the same results as the first time. I'm about to change filaments to print some other projects, but I'll keep the TPU in a vacuum bag and will probably run it through a dryer before making any other prints. I would definitely buy the Geeetech again, though.

So, this prints fantastic out of the box. No real "tweaking" needed.However, it is worth noting that due to the larger center hole in the filament spool, it will not fit in the Bambu Labs A1/A1 mini spool holder. So, you'll have to use the external spool holder for it. Not a big deal at all. But, I wanted to share this info.But. Again, it looks fantastic (Black PETG) and prints great.

This filament definitely has a softer, more elastic feel than other TPU filaments I've used. Generally, I print TPU at 230° with good results. I was surprised when my first print with this filament was showing scorch marks. I dropped the temperature from 230 down to 215 for my next print. It was still showing signs of burning. Finally, reduce the temperature to 205 and it's printing beautifully. In all fairness, the label does indicate a temperature range of 190 c - 210c, but this is the only TPU I've tried that can't handle 230. Even though I have to use a little more care, this may be my new go to TPU for achieving prints with more give.Pictured are my first second and third prints.

The media could not be loaded. EDIT 08/2024: I'm amending this review to 4 stars - the seller reached out and graciously offered a refund. I appreciate them offering to make things right, and I'll update this review further when I order another spool to compare against.I received a spool of Rice Krispies because all this filament did was snap, crackle, and pop. This TPU arrived sealed and I opened it right away, so it should have been pristine and printable. The video shows my first test print - I could see steam coming out of the hot end, and the audio speaks for itself. Even after 12 hours in a filament dryer, I still get some popping and stringing. The only saving grace is that I haven't run into any tangles yet, despite how gnarly the winding looks. 1 and a half stars rounded down to 1.

Geeetech 95A TPU - BlueThe spool was sealed well (there was a pop when I cut the vacuum bag).The color is very nice and there is some translucency in thin prints.I've heard a lot about issues with printing with wet TPU, so I decided to throw the spool into a dryer (Sunlu S1 Plus) overnight at 55C.When I checked it in the morning, the spool was about 7g lighter.I printed several models (including a benchy, obviously) on my stock Bambu Lab A1 mini and they turned out better than I expected. I used the default "Generic PLA" preset in Bambu Studio.

I buy tpu filament often. I found a good balance between price and quality with Geeetech, but this roll of yellow filament was not produced to the standard I usually get from them. As you can see in the picture, the filament is squiggly on the roll. It appears to be twisted. This roll of filament caused me nothing but headaches from failed prints. Due to the squiggles it would snag in the roll. It caused increased resistance in my reverse Bowden tube and then it would get stuck in my direct drive extruder and grind the filament instead of extruding, which caused multiple prints to fail. I loved the electric yellow color. I wish I could have used it.

Went to the Geeetech Wiki and found the settings to use. Worked great on my Bambu A1 :Nozzle temperature: 200-230℃Bed temperature: 60℃Printing speed: 200 mm/sInitial layer height: 0.2 mmInitial layer printing speed: 45 mm/sIdle speed: 250 mm/sRetraction distance: 2.5 mmRetraction speed: 80 mm/sCooling fan speed: 100%Initial layer cooling speed: 0%Build plate adhesion: Edge

I bought this tpu to print rubber feet for my guitar pedal board. It printed smooth and perfect!

Works well in 3d pens. Children have hours of fun creating and printing things with all these colors.

No issue at all. Prints well.

Das schwarze TPU-Filament hat mich durch seine herausragende Druckqualität und verlässliche Leistung begeistert. Die gedruckten Objekte überzeugen mit einer glatten Oberfläche, präzisen Details und exzellenter Schichthaftung. Die gleichmäßige Wicklung der Spule sorgt für einen reibungslosen Druckprozess, während die konstante Filamentstärke eine gleichmäßige Extrusion ermöglicht. Auch hat das Material nach dem Druck eine echt hohe Flexibiltät. Das Preis-Leistungs-Verhältnis ist unschlagbar!

S’imprime très bien un très bon résultat très jolie couleur noire

Bel colore, un verde bluRullante e bello resistente come Petg...Stampato senza proble.i e senza stringing o problemi di adesione, già in mano a mio figlio da qualche giorno e resiste ai maltrattamenti....Busta sottovuoto inclusa nella confezione che non fa mai male....