Hoteche 18GA 2-in-1 Electric Brad Nailer/Stapler 19/32-Inch to 1-1/4 Inch Staple Gun Power Adjustable Nail Gun with 2000Pcs Brad Nails& Staples for Home Upholstery and Woodworking

great

Just what I needed.

Was slightly concerned due to the reviews saying that this nailer does not get the nails flush, which if you’re trying to use this as a high powered air nailer it’s true, however, if you push the tip of the nailer firmly against the material you’re trying to nail it should be completely flush. It took me a little bit of testing on some cedar fence pickets before I got the hang of it! If you work with mostly hard woods this might not be the best for you but for me, I mainly work with pine and cedar so it should work perfectly for me!

This would be good for upholstery project but not anything else. It barely got nails into the wood and I had to finish with a hammer. Just not powerful enough to do the job.

Exelente maquina la recomiendo 100%

This is definitely the tool for small DIY projects. Really transforms the blunt force of a hammer into a precision placement staple gun. Don’t get me wrong, it is a really good nail gun for low volume jobs. Perfect for the average home owner, and value priced. I used it on quarter round oak during a floor repair without a problem. Nice inclusion of a variety of brads and staples, too. Oh, did I mention it’s electric! Totally potable.

Nope. I need to return this nail/staple gun. It's not powerful enough to get through door trim or baseboards. I had an MDF material and it barely got through the baseboard. The door trim left 1/4 inch hanging out and we had to carefully hammer every single nail to make them flush. Thisight be okay for a balsa wood craft project but not for heavier work.

I needed it to shoot 1 1/4" brads, which it did. However, the power gauge didn't seem to work. Therefore, the brads didn't go in all the way. With a hammer and brad setter, I made it work for my small project. I don't think you would want it if you had a big job. Probably does fine with 1" or shorter brads. I didn't jam and was safe and easy to use

Muy funcional y resistente. Funciona bien con 110V. Mi única observación es que todos los clavos llegaron regados y separados, no estaban bien empaquetados.

So far so good. I used it with 1" brad nails into 1/2" cedar panelling to a stud. Powerful, almost sinks nail entirely, just used a nail set to finish. Perfect with the colored nails, too, making the project look good and it is easy to use and load. Recommended for the do it yourselfer.

This is one awesome nailer. Well balanced and grips easily. Made very sturdy should outlive me. Very heavy duty body. Works great with staples and nails. The best is using the one inch nails. It's the only nailer I could find that can do one inch nails. All the others, the best they can do is 3/8 inch. Great product. Highly recommend it. Great company to deal with. When it was delivered, the box was badly damaged. Looks like the UPS children had a soccer game with it. All the nails that came with it were all broken to little pieces. I contacted Hoteche and explained what happened. They send me replacement nails. Very nice of them to do that. But the nailer is awesome. Made very solid and works great. Good job Hoteche on a fabulous over the top product. It does "One Inch" nails folks.

Resulta muy práctica ya que no requiere de compresor de aire ni mangueras. Versátil porque puede trabajar tanto con clavos como con grapas. La he utilizado un par de veces para clavar melamina de 15 mm, ha funcionado bastante bien, solo un par de veces los clavos no se insertaron del todo, pero creo que fue más por no haberla posicionado correctamente. La seguiré utilizando esperando que con la práctica en el uso de esta herramienta, mejore el resultado. Le doy 4 estrellas porque al momento de accionarla se percibe en los focos el “jalón” momentáneo de corriente. De ahí en fuera, todo bien.

I got this because I didn’t want to spend $200–$300+ to replace my cordless brad nailer. I’ve only tested it for about a day, so I’m not sure how long it will last, but so far it seems to work fine. Don’t expect it to fully sink 32mm nails every time—it won’t. I often had to use a nail set and hammer when working with harder materials. If that’s a deal-breaker for you, then this product isn’t for you. But given the price, I think it’s a decent piece of equipment.