2.85mm 1 Kilogram Rainbow Gradient Multiple Color PLA 2 (PLA 2nd Generation) 3D Printer Filaments Transition Colour Multicolor Progressive [Made in USA] 1kg 1kilogram/roll 3mm 2.85 mm 3.0
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

2.85mm 1 Kilogram Rainbow Gradient Multiple Color PLA 2 (PLA 2nd Generation) 3D Printer Filaments Transition Colour Multicolor Progressive [Made in USA] 1kg 1kilogram/roll 3mm 2.85 mm 3.0

2.2/5
Product ID: 54237549
Secure Transaction
🌈Rainbow gradient
📏126m length
⚙️2.85mm diameter
Frequently Bought Together

Description

🎨 Color Your World with Every Print!

  • MADE IN THE USA - Proudly crafted in the USA for quality you can trust.
  • EFFORTLESS DETAILING - Achieve stunning details that minimize sanding and prep time.
  • NEXT GEN FLEXIBILITY - Experience enhanced flexibility and reduced brittleness with PLA 2.
  • UNLEASH YOUR CREATIVITY - Transform your 3D projects with vibrant rainbow gradients!
  • COMPATIBLE WITH MOST PRINTERS - Designed for 3D FDM printers that support 3mm filament.

This 2.85mm Rainbow Gradient PLA 2 3D printer filament offers a unique blend of vibrant colors and enhanced flexibility, making it ideal for creative projects. Weighing 1 kilogram and featuring a length of approximately 126 meters, this filament is compatible with most 3D FDM printers. Developed in the USA, PLA 2 is designed to provide excellent print details while reducing the need for extensive sanding and priming.

Reviews

2.2

All from verified purchases

A**Y

Awful. Jammed up printer. Returning.

We ordered this because we ran out of another rainbow filament we purchased on Amazon (which by the way created gorgeous prints) and that other one became unavailable for additional orders. We were super excited to get this filament, and incorrectly assumed the price would be commensurate with its quality. We attempted multiple prints, but the stuff failed repeatedly and clogged up the print head worse than we've ever seen from any other filament. We have a high-end printer that has had no problems with other filaments, so we're attributing this experience to this new filament. It's going back to the sender ASAP. Total bummer.

3**E

Mostly well-behaved, great adhesion, some issues with underextrusion, excellent value overall

Setup: I have an Ultimaker 2+ with a Bondtech DDG extruder installed. The prints shown in the pictures were printed using a 0.4mm Ultimaker brass nozzle.Pros:++ Amazing bed adhesion--I didn't need to tinker with the buildplate temperature at all (I had it set to 55 C).+ Very sturdy+ Color change effect++ Handles bridging and overhangs very wellCons:-- Mild issues with underextrusion**DISCLAIMER: [Underextrusion occurred at temperatures of 210 C (with a print speed of 70 mm/s). I tried increasing the temperature to 220 C, which helped, but then I started to get severe pillowing on the first few top layers over the infill. To be fair, though, the infill was VERY sparse. My aftermarket extruder may also have played a role in the initial underextrusion I experienced. I managed to fix it by dialing down the temperature and reducing the speed for the top layers, and the print turned out fine in the end.]- A minor quip, but it would be really nice if the colors changed faster, and if there was some repetition, as opposed to the gradient spanning the whole spool.Conclusion: All told, this filament behaves almost identically to FilaCube's other PLA 2 filaments. The few minor problems and quips I have regarding this filament are, in my opinion, outweighed by its price and some of its nicer properties--such as its excellent adhesion and good bridging/overhang printing (when those settings are actually used by the slicer software). All in all, a pretty darned good filament--especially for the price.

D**Z

Drab colors. Too much of one color before transition.

This Rainbow PLA is not very colorful. It also does not change colors that often. I have used 600g (60% of Spool) of material and only see 3 colors in my 3D Print (Red, White and Purple). See attached photo.This was a big print with a lot of material, 3 days and 6 hours and it does not have much color transition.

M**.

Not consistent throughout roll. Drab.

Color is drab and most of the roll came out a greyish color mixed with whatever color it should be. The circumference was not consistent all the way through. There were thick sections that caused clogs and ruined multiple prints.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

Vanuatustore

Sorry, this item from our Vanuatu store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

2 85mm 1 Kilogram Rainbow Gradient Multiple Color Pla 2 | Desertcart Vanuatu