Please Notes: 4-Channel RF Wireless Remote Control Duplicator for Garage Doors, Gate Doors, Alarm Systems etc. This is a fixed frequency remote cloner (315MHz / 433.92MHz) for copying 99.99% common fixed and learning code remote controls including Came, FAAC, NICE etc. Clone up to 4 remote signals from 4 different remotes! With this remote cloner you can clone all 315MHz / 433.92MHz fixed code key fobs. Check this link for a video of the cloning process: http://www.youtube.com/embed/FbmauP1X63M @@IMPORTANT: Rolling code type remotes maybe NOT work. @@ User Manual -How to Use it (It's easy,The bellow Steps are the universal User Manual of the this kind Remote Control Key) 1. Press the two top buttons until the blue LED flashes - this takes around 3 to 5 seconds. 2. Place the cloner remote and the original remote close together/side by side so that they are touching. 3. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. (The Blue LED will first flash 3 times quickly,then stops for a second, then flashes steadily for successful cloning). 4. Programming is now successful. If you want to program more buttons simply repeat steps 2 > 4. (To reset the remote simply start again with step 1 (this will completely reset the remote)).5.Recovery: you can press the 2 keys at the bottom of the Mutual-Duplicating Remote Control at the same time, the LED light will flash rapidly, and then press any key, the light will keep bright, which means the code of the Mutual-Duplicating Remote Control has been recovered. Before using our Mutual-Duplicating Remote Control to copy, you must clear the present code of the Mutual-Duplicating Remote Control.
L**O
HIGHLY RECOMMENDED - EXCELLENT!
Excellent product - I ordered 4 and all work perfectly on our Electronic Gates.Great value for money. Plus they work from a further distance away than my original key does!Well packaged with excellent, easy to understand, instructions.Simply hold down buttons A & B together until the light flickers (about 2-3 seconds) ;...then line up the new device alongside your original - with sides touching - & hold down the button on your original along with with any of the buttons on your new PBELE remote control key (A,B,C,or D) (for about 2-3 seconds). That's it! It now works!These little devices are better than my original (which cost me £30!), because you can clone up to 4 devices on one key eg. Electric Gates, Garage Doors, Alarm System etc.So impressed - we are about to order another pair for our sons!
S**M
Good when they work
Only 1 worked. I know this because I was trying the first for an hour and it wouldn't clone no matter how many times I tried. I tried the second and it worked on the first try. If you have problems try the other one. I only needed 1 so didn't matter to me but it probably would to someone else buying 2 so giving 3 stars.
M**T
I use these everyday
Bought this so I could have one and my girlfriend could have one. They get daily use since they open the gate to my gated community. Only took a few minutes to set up. Zero problems with the remote so far. Plus if you need to change the battery out its only a few screws and wouldn't take more than 2 minutes.
J**E
Will not work
Do not work.Followed instructions and tried numerous times but neither of the remotes work.Light sequence specified in instructions does not happen, I just get rapid flashing red light, no steady flashing light and no lights to confirm it has picked up signal from original remote.
M**G
Very good - they were easy to program and have been ...
Very good - they were easy to program and have been working perfectly for a couple of months. They were a fraction of the price of the OEM CAME items and work perfectly on two separate sets of gates.
S**D
Works Perfectly - IF you are having issues with the ...
Works Perfectly - IF you are having issues with the new remote learning the code, MAKE SURE you put a BRAND NEW battery in your old remote. Just because it haas enough power to open the gate / garage doesn't mean the signal is strong enough for your new remote to recognize it!
A**R
One Star
Both products didn't work not quite sure why
A**D
fabulous value, they do work!
Really pleased especially for the money. Was worried as my existing remotes kept failing so needed some back ups! Who can complain for £7????To programme, hold down the A and B buttons together until you get a blue flashing light on the new remote. Hold the original remote up to the new one, and if you want to programme button B, press button B on both remotes at the same time and hold for 10 seconds or so. Then press the A buttons together in the same way.
Trustpilot
1 day ago
3 weeks ago
