ZIRO3D Printer Filament,Translucent PLA Filament 1.75mm,Multicolor Rainbow PLA Filament,1KG/2.2lb,Season Series - Summer

The filament reminds me a lot of satin tafeta fabric. It still has a bit of the silky features but also is more matte. Calling it satin might be appropriate term. This one has 3 colors. Magenta/red, blue, and neon yellow/green. It honestly looks like it has more when it prints but it does only have 3 colors. I printed a textured octopus, a tool part, and a display cover. The display cover is completely flat and what results is interesting but probably not what most people are wanting. This filament pops best when it's used for details and textured models. Also this filament will absorb moisture quickly. I needed to dry it a few hours out of the bag because otherwise it popped and crackled. This is typically true of any matte. But heads up.As for using. Similar issue as most silk filaments. Poor overhangs. May need printed super duper slow to get rid of those. Many issues can be seen on the back of the octopus but the texture hides a lot of them. This was printed at 200c, 65c bed, 60-90 mm/s (varied at different parts like infil and walls).Despite this, this filament is quite nice aesthetically. I will probably buy the other two matte rainbows in the future after I use up this one. Oh and the filament came with a big thick storage bag. Nice.

This stuff prints well and looks awesome! No issues with layer adhesion. With proper settings no stringing issues either. Nice shiny fun color prints. It performs well both at standard and high speeds. I have purchased multiple rolls and will continue to. Something I noticed about my last roll was that it had a twist in it near the middle of the spool and another near the last quarter of the spool. This caused a shift in the colors. However, in my opinion, it made the print that it was used in (dragon egg) more interesting. In other models it may have been an issue. This current roll I’m using appears to have a shift or twist in it viewing from the side, I will be mindful of that when printing however, I don’t foresee any problems as I use it for prints where I really want the colors to pop. I will continue to use it.

Zuerst war ich skeptisch, weil ich noch nie ein Tri Colour Filament verwendet habe. Zusätzlich schaut das Grün eher Gelb aus, sowohl am Foto als auch in echt. Jedoch hat mich die Druckqualität und wie leicht es zu drucken ist voll überzeugt. Gelb ist auch nicht zu sehen, sondern ein schönes HellgrünGedruckt auf Bambu Lab X1 mit AMS, passt super rein.220° / Standart Einstellungen / Außenwand und oberste Schicht mit 50mm/s

Imprime genial a 205-210 el acabado es alucinante. Un 10 para este filamento

Have had this for a few weeks now and can say it prints well on my Bambu X1C with little to know config needed.The colours are just as shown in the pics and adheres to the print bed fine at 30c for me.