Lifetree Window Film Privacy for Glass Windows 60 x 1000cm, Frosted Stripe Patterns Static Cling No Glue UV Protection Window Sticker Cover for Home Office

It's very easy. I would suggest buying the little tool that flattens the bubbles out. Use plenty of water. If you make a mistake, just peel it off and redo it. Don't stress. Great for privacy in bedroom if you don't want nets. Looks fab. I'm so happy with it. One roll did the two windows.

Quick and easy to install: Clean the windows and buff them dry with a cloth. Cut the film with scissors to roughly the size of the pane its okay if its a bit bigger. Lighty spray the window with water mixed with a tiny single drop of washing up liquid, peel off the backing and apply the film to the window. Use an old discount/oyster card etc wrapped in a cloth to start smoothing the film outwards towards the edge to remove any lumps and bobbles. Carefully use a ruler or something similar and a hobby craft knife (mine was like £2) to cut off the excess film. Do not use a hardened steel knife etc as it can scratch the window! For the next day or so just keep smoothing out the bumps/water ro the edge of the window. I hope this helps! As for the film, its good quality and much better than a cheaper one we used, has larger gaps that offers privacy but let's in just enough daylight. Now my mum wants me to install it on her windows!

This was easy to put up and looks great. My only niggle is that the stickers used for separating the back were not that great.

Brilliant product. I have been looking to get rid of my net curtain that was in my kitchen window for a long time and finally found these vinyls! They look sophisticated whilst keeping the natural light coming into the kitchen. There is also a slight glitter to them so they also look nice from the inside. I did have to buy two different sizes to fit one window so beware, you will just have to make sure you measure all panes of glass that you wish to fit them on. I did also have to do some trimming on the edges as there was some excess vinyl. Ease of use: I found them very easy to install on my windows. The key is to make sure you wet the vinyl and the window a lot, and you’ll be able to move them about to ensure they are straight. The stickers that came provided I didn’t use as didn’t think it was necessary, the back of the vinyl was easily removed using my fingernail. Getting the water out was easily done using a credit card wrapped in a cloth and then gently working over the bubbles and pushing them to the outside. Cutting the vinyl to fit the window was very easy. I just butted a ruler against the film and window edge and then cut with a craft knife. Overall very pleased with the product and would definitely recommend. After putting them up I am sure they will last a long time and give my kitchen a much neater look than the net curtain ever did!

I have public foot paths on 3 sides of the house and have previously used blinds for privacy. They were OK for day time but useless on an evening when I had the light on indoors. The blinds went mouldy with condensation so needed to be replaced I looked at several window films and selected this one because it only has narrow clear lines and offers the best privacy, I also really like how it sparkles when the light hits the frosted lines. The film itself is good quality and easy to install, I measured and cut each piece 1mm smaller than the width of the glass, it shouldn't over run on to the black seal around the glass or it won't stick properly. Smaller windows are much easier to fit the film, if you have any bubbles peel it back and spray over with more water. I used a soft squeegee to smooth it over then wipe down with a damp cloth The rooms are much brighter now compared to the blinds I had, and it offers better privacy even with lights on indoors. You do loose your view, I can see people walking past and cars, but not clearly out into open space so I kept one blind, film fitted on all other windows including a large bay window, it looks good from inside and outside Any negative reviews here I can only assume are user error, either from not removing the backing plastic after cutting the piece, trying to stick the wrong side of the film to the window, not using enough water, or cutting the film too big so it overlapped onto the black window seal. One side of the film is smooth, one side you can feel the texture, the smooth side is the static side which goes against the glass Would buy again and recommend for privacy

This was really simple to install though I didn't use the tape provided to separate the sheets, just some decorators tape which worked well. So pleased with the result! Really gives an added decor to the windows as well as been functional in terms of privacy. Great price too bought with black Friday discount so no complaints. Would buy again.

Very easy to install Has a glittery opaque finish which isn’t as tacky as it sounds Great privacy so very effective Easy to clean Very durable Size is good the roll has more than I needed

NOT AS SHOWN. The stripes on the roll are vertical. ie you get a whole roll of vertical lines. This means, for a standard window, you have to place two full horizonal and one partial horizontal strip across the window to get full coverage of horizontal stripes. You also have to pattern match. Stupidly, they have added the pattern match through the frosting rather than the clear bit which then makes the join super obvious. I would have returned this for a refund but needed to get something up on the windows.