Specification: Item Name: Omnibus F4 Flight Controller AIO OSD PDB BEC Current Sensor and LC Filter Model: F4 Pro Corner MCU: STM32F405 BEC Output: 5V@2A Hole Distance: 30.5x30.5mm STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD) Built-in Current sensor Built-in Professional level PDB Built-in LC filter for Camera power(max 800ma) Firmware Update: betaflight_3.2.0_OMNIBUSF4SD Features: STM32F405 MCU Use ICM20608 over SPI for the best possible flight performance With onboard damping box, the ICM20608 runs perfect under 32k Gyro loop With onboard barometer and AB7456 OSD chip for the BetaFlight integrated OSD There is only 0.2-0.5 mohm internal resistance from input to each output pads Package included: 1x Omnibus F4 Flight Controller 2x Cable 1x Pins
D**W
Doesn’t work
The board looks great and all but doesn’t work right. By the time the rest of the parts for my for drone arrived the return window had closed and once I finally got to put my drone together and everything it wouldn’t fly. The board will not give any pwm output to esc 2.All three other motors and escs work great but I cannot contact esc2. The board will not even allow me to read or write the firmware on esc 2 which is brand new so I know the esc is not he problem.
C**H
Decent flight controller, Gyro bad on first flight controller, USB micro broke off on the second.
I have bought two of these flight controllers. The first flight controller i bought had its gyro go bad and is useless. I bought another which has been working alright. Recently the micro usb port broke off. Luckily i was able to solder it back on. Be aware of the micro usb, reinforce this to avoid a headache.
A**R
Bad soldering,
Half the USB connector was not soldered. Could not talk to the FC.
Trustpilot
1 month ago
4 days ago
