Samsung LS49CG934SUXXU Odyssey OLED 49" Gaming Monitor - 5120x1440, Speakers, HDMI 2.1, 0.03ms, 240Hz

I've been using this monitor for a week now, for both gaming/content consumption and working from home and I'm very happy with it. Firstly, I did a LOT of research before buying it and there's a lot of evidence of negative experiences across the interwebs for a number of reasons. Most of which (from my research) appear to have been caused by combinations of bad firmware from Samsung interspersed with bad cables, bad GPU settings and bad components used within the monitor itself. I took each issue and decided what my risk of experiencing them was. From comments online most of the issues I could find were linked with nVidia GPUs, but I run AMD 7800XT so my view was that my risk was low. I use a high quality Ugreen DisplayPort 2.1 cable supporting 40gbps from my home PC, so again risk was low. A lot of issues also apparently stemmed from using 240hz and VRR, neither of which I use when playing games like Satisfactory so I left the screen in 120hz mode which is more than enough for me and my modest GPU. The biggest issue I could find is that there was a faulty thermistor used on the T-Con board, which appeared to have been adding resistance to a circuit when the temperature of the monitor dropped too low, and thus preventing it from powering on where it had sat in a cold room and/or unused for an extended period of time. My home office gets cold-ish at night, dropping to 17 degrees at times and I've not seen this issue YET. It arrived with firmware version 1009.0 which I see online was released by Samsung in May 2025, and so I'm assuming that this unit was assembled not long before that and has had any hardware concerns seen previously addressed. I'm happy to say that in my use, I've experienced no issues. On my gaming PC I run full resolution at 120hz and I also use PBP for my work laptop as it only has DisplayPort 1.2, and so can't provide the full 5120x1440. I use the two HDMI inputs at 2560x1440 at 60hz and the only issue is that to change to PBP I have to enter the monitor OSD, select the correct input and then turn on PBP manually and it's a bit annoying (especially as the button doesn't always respond first time). Other than that, the PBP experience is good and it's basically no different than using a single monitor other than Windows wanting to snap things to the (invisible) right/left edges when moving between the two logical displays. In terms of image quality etc, everyone these days knows what an OLED screen is and what they can do. I came from a 34 inch VA panel and so it has been a rather large upgrade in terms of angles, colours, blacks and brightness. Watching a 32:9 OLED showcase on YouTube is an eye-opener for sure. There's a lot of "mimimi ohmygod the text" complaints around too, but I just don't have any issues with it at all. I work in the IT field and so I spend eight hours per day reading code and I don't have a problem with eye-strain or anything linked to reading "poor quality" text on this screen. A large part of what drew me to this monitor over others is the design of it - It is hands down the best looking monitor in the universe. The bezels are a bit big, but that thin and curvy rear end is so pretty and all of the other black box monitors just look poor in comparison. Being so thin, the power supply is external and to be honest its so big I thought that they'd bundled a Virgin Media box with the monitor for a second. The stand is a hefty, flat metal plate, so it doesn't take up over 73% of your desk and can have things on top of it where required. It has an almighty wobble on it though, any time I breathe in its direction it bounces all over the place and it is definitely something that needs improvement. I may buy an arm for it, but I'm not sure that it would improve stability much. Not sure why it needed to have the nVidia branding on it either, especially when taking the aforementioned issues into consideration. One thing to note, being an OLED the screen requires a periodic refresh and it likes to do this after four hours of use. It does this the next time it goes into standby and while Samsung state that it takes fifteen minutes, I've timed mine at more like twenty. I know when it is doing it because there's a small (and not very bright) red LED under the Samsung logo which flashes when the monitor is asleep, but doesn't start until the pixel refresh has finished. Not allowing this process to complete will result in a message telling you so, and I understand that it may force the process should it not be allowed to complete after a specific number of hours of use. Previously I'd turn my PC and screens off at the socket when not in use, but since owning this monitor I've put it on a separate extension which is never powered off. Again, I'm very happy with it but definitely do your research and consider the potential issues for your use-case should they still exist with the current stock. It's 4.5 stars, not 5, only due to the wonky software and OSD control button. It's also a bit over-priced, but as I'm writing this on a Friday it gets a 5 rather than a 4.

Samsung LS49CG934SUXXU Odyssey OLED 49" After extensive research and consideration, I ultimately selected the Samsung LS49CG934SUXXU Odyssey OLED 49" over other monitors for several compelling reasons: 1. Unparalleled Visual Quality: OLED Technology: The Odyssey's OLED display offers unparalleled visual quality with vibrant colors, deep blacks, and infinite contrast ratio, providing an immersive viewing experience that surpasses traditional LCD monitors. Wide Viewing Angles: The wide viewing angles of the OLED panel ensure consistent picture quality from any angle, making it perfect for group settings or multi-monitor setups. 2. Immersive Gaming Experience: Ultra-Wide Screen: The expansive 49" screen size delivers an immersive gaming experience, wrapping me in the action and enhancing peripheral vision for heightened immersion. High Refresh Rate and Response Time: With a high refresh rate and fast response time, the Odyssey OLED ensures smooth and responsive gaming performance, minimizing motion blur and input lag for a competitive edge. Adaptive Sync Technology: Adaptive sync technology reduces screen tearing and stuttering, ensuring a seamless gaming experience, especially when paired with compatible graphics cards. 3. Productivity and Multitasking: Large Screen Real Estate: The 49" ultra-wide screen provides ample space for multitasking, allowing me to have multiple windows or applications open simultaneously without sacrificing visibility or readability, boosting productivity. 4. Premium Design and Features: Sleek Aesthetic: The Odyssey OLED features a sleek and modern design with slim bezels, adding a touch of elegance to my gaming setup or workspace. HDR Support: HDR support enhances the visual experience by providing greater contrast, brightness, and color accuracy, bringing out the details in HDR content. Advanced Gaming Features: Additional gaming features such as low input lag mode, black stabilizer, and customizable gaming profiles cater to my gaming needs, allowing for optimized performance and personalization. 5. Brand Reputation and Reliability: Samsung Quality: Samsung is a trusted brand known for its quality and reliability, giving me confidence in the performance and longevity of the Odyssey OLED monitor. In conclusion, the Samsung LS49CG934SUXXU Odyssey OLED 49" stands out as the superior choice for my needs, offering unmatched visual quality, immersive gaming features, productivity-enhancing capabilities, premium design, and the reassurance of Samsung's brand reputation and reliability.

The picture is good... and big. The cons are, split screen is awful, and pib is bad too. Don't get control of aspect and a pain to switch. The biggest thing to me is, barely over 6 months it just stopped working. It's very overpriced, I'd suggest looking at another brand. Update: samsungs contacted repair company has had my monitor for 10 days with no updates. I wish I never bought it, I've had to get a spare while I'm waiting. For monitors, buy samsung buy twice apparently.

amazing monitor for gaming and multitasking does not weigh that much for the size and connectivity is great with a windows PC however check that what you are using it for will work as Xbox does not work well on super ultra wide but it is a great monitor at a great price so i would say amazing value for money with its amazing picture quality on the 49" OLED screen however the UI built into the monitor is terrible but not something you use a lot as long as you just keep the monitors speakers on 100% all the time and toggle volume through your chosen device

Very good monitor, excellent colours but there are some things you need to know to avoid problems: Do NOT use the included mini HDMI cable instead use a standard HDMI cable Go into monitor OSD settings and manually select your HDMI input port Turn OFF auto source select I had a couple of issues with sleep/wake and the monitor changing resolution when waking but the above solved everything for me. Even Samsung technical support couldn't find the solution, had to do it all myself.

The OLED picture quality is impressive. The aspect ratio and the curve are very strange at first, but you do get used to them. I find this screen very useful for productivity. This screen is superior to using two 1440p monitors because the lack of bezels in the centre provides more flexibility. It is useful to be able to enable PBP mode with two cables from the same PC - so one part of the screen is 3440x1400, and the smaller part is 1680x1440 (there are other options too). This provides a 21:9 ultrawide section, with another smaller section for email or whatever is useful. The ultrawide section can also be split into two windows when needed, which you couldn't do with two 1440p monitors. Note that HDR and VRR are not supported with PBP enabled, and each monitor is limited to 120 Hz rather than 240 Hz. Also, the G95SC version of this monitor (with smart TV features) does not allow two PC sources like this, which is a deal-breaker for me. In normal 5120x1440 240 Hz mode, gaming is fun and immersive, but obviously this is not supported by all games and it involves the GPU driving close to 4K resolution. With or without PBP, I'd recommend using FancyZones software to help organise windows easily - once you're in the habit of pressing shift to activate it, it's much better than Windows 10 window snapping. I prefer to maximise windows with PBP active, but FancyZones is useful occasionally. I like the rear LED feature, and it has decent configurability. I didn't have any issues with text readability, at 100% scaling in Windows. I very rarely notice the pixel shift feature operating. If anything, I'd say that the brightness setting doesn't go low enough. However, there are two major problems with this monitor: 1) The USB C ports are too loose, and cables do not "click" into place. Devices will randomly disconnect and reconnect due to the bad connection. It appears that this is due to the ports being too far back relative to the plastic case. I returned my first monitor due to this, expecting it to be bad luck, but the replacement had the same defect. Amazon said that they would remove the product from sale due to this design flaw, but that doesn't appear to have happened. 2) Getting PBP to work correctly is very fiddly, and I'm worried that a future Windows or GPU driver update could break things. I've found that it's only possible to successfully switch between PBP on/off if the main display uses HDMI and the secondary display uses DisplayPort. If not, no signal is received after switching PBP on/off, and you need to do a hard reset of the PC every time. I'm not sure if this is a GPU or monitor issue. It's not a huge problem once I figured out the exact settings which are working for now, but it feels fragile. I'd rather use DP for the main screen because it "connects" faster and is registered as the default monitor by Windows. Also, if you disable the second screen in display settings while in 5120x1440 mode, enabling PBP results in reduced resolution and refresh frequency, which is not usable. Windows 10 is also buggy here, but in fairness enabling/disabling PBP is probably difficult to track and always do the correct thing. I've not tried Windows 11 yet. Some other issues: The cable management isn't great. The G95SC version has a better approach. The control buttons are fiddly. I wish there was a dedicated, simple button for on/off. The configurable menu shortcut doesn't really save much effort. As mentioned above, it is unfortunate that some features are unavailable when using PBP.

Might be early, but the monitor has been a game changer for me. No bugs, just pure bliss. Fantastic picture, amazing viewing space, feels responsive and it's just an otherwordly experience gaming on this thing!

Fantastic monitor, my first one arrived faulty but Amazon quickly replaced it, I don't see why people give these bad reviews, amazing colours, deep blacks and amazing refresh rate Would recommend to any super ultra wide fan :)