PEBA Spade Terminal Crimping Tool Kit, AWG 24-14 Crimper for Quick Disconnect, Male & Female Non-Insulated Terminals 0.110"-0.250"

I have two sets of crimp tools already. However the anvils for this type of connectors never worked very well. The anvil's are poor quality or the design is in correct. They either crush the connector pins or are to loose and the cable pulls out. So I looked around for some better quality ones and found this set. At first I was sceptical as the price was not that high, and I thought they would be like my other sets. Until I found out a friend of mine was using these exact same ones. I asked if they were any good, and he gave them to me to try for a while. The first crimp I did failed, so I adjusted the tension one click and woohoo, Perfect every time. Nicely formed crimp with the right tension, grips outer wire sheaf nicely without cutting through to the inner core and no distortion. Just make sure you use the correct size for your connectors as marked on the anvil and test first to check if the tension is correct and you should get a perfect crimp every time.Note do not strip to much wire insulation off as you only need enough bare wire to fit in the second crimping section, too much wire sticking through means you have too try a trim the excess. Very fiddley if you do this. So this is the best pair I've bought for this connector type, and believe me one of my other sets was not cheap! And to be fair it's other anvils work fine. I build a lot of motorcycle wiring harnesses, which use this connector type, either bullet or spade types, and I get a perfect crimp every time with this tool. So you should be able too as well. A word of caution avoid cheap connectors. They tend to be too soft and distort to easily. I test some out of interest and out of ten tests only three worked. I did the same ten test on both spade and bullet connectors and all three common sizes and got same results. Only 30-40% success. So I recommend sticking with at least reasonable quality connectors. You will get a lot less frustration. Hope this helps someone.

Am Besten hat mir gefallen das meine Lebensgefährtin (ü 60 ) die Zanke nach kurzer Einweisung von Mir SOFORT VERSTANDEN hat . Man fühlt sich wie ein Elektriker und am Ende sieht das Produkt sehr gut aus . Habe diese Zange plus Zubehör gekauft um an meinem alten Traktor neue Scheinwerfer Neu an zu klemmen . Meine Lebensgefährtin ist sehr erstaunt über solch ein tolles Produkt . Fazit : Preis und Leistung können WIR nur empfehlen .

Top, super travail, comme sur les photos.

Calidad del crimpado de 10

Macht was es soll sehr gut 👍