RaquexEndure Racket Overgrip Tape – 3 Pack Racquet Overgrip Tape, Durable, Dry Feel, 0.75mm Thickness - Anti Slip Over Grip for Tennis Racket, Badminton, Squash, Padel

I have about 3 rackets 2 x tennis and 1 Badminton that required a reaper to the grips. I saw these were available and thought I'd give them a try.They arrived in a small neat wrap packaging. Reading the blurb they are a Uk company so that is a positive from my perspective as I like to support Uk businesses.After cleaning the old grip material I set to work fitting the new ones.First of all I nearly threw away the tape that held them together, luckily I didn't as this is required for securing the final end wrap in place.I also had to completely unravel the new grip material to get at the start , which is clearly marked with "start' and a small adhesive strip to hold in place on the racket handle when starting to wind it round.I found the trick wa stop stretch it fairly hard (but not overly) and make sure the overlapping edge clears the "Raquel" logo therefore overlapping by about 1/8-1/4 of an inch.It is necessary to cut the end portion where it finishes on the racket off at an angle.so it folds straight. The first time I did iy the craft knife blade was not sharp enough as the material ids very flexible and unless the blade is very sharp will move and pucker rather than cut.I had to be careful putting the black end tape with the Raquex logo on as the first one I overstretched it by pulling it too tight. It just requires a gentle stretch as you peel off the backing strip to adhere to the racket and top end of the grip.There is a QR code to get the fitting instructions on the box. if in any doubt, but I found it fairly straight forward to do.They seem to do a decent job and give a good tacky feel to the grip. It took me around an hour to do all three.In summary fairly decent, but not the thickest material to be fair. Time will tell but pretty good price for 3 grips in my opinion. ( £7.99 at the time of the review).

Used this to overgrip my badminton raquet. Simple but clear instructions provided, unroll the whole grip to find the cut 'start' end. There was enough length for me to do a 50% overlap as I wrapped the grip (to bulk out the handle a bit) and I still had to cut a fair length off the end. Only played for an hour with the new grip but so far there's been no problems. Dropped a star as it's not particularly 'tacky' and very thin, but otherwise does the job ok.

This overgrip works as expected. As usual it has self-adhesive on the start end of the tape (narrow end). Wrapping the racket handle from its bottom and ending the wrapping near the shaft, a separate sticky tape was included for fixing the wrapping end. I used this tape for badminton racket and noticed that the tape was a bit longer for badminton racket. The tape is soft and functions well for vibration damping.This tape is thin, so only suitable for overgrip wrapping. Pay attention not to mix this tap with a thick racket tape which is used for wrapping on the wooden handle of a racket.

These overgrips feel tacky enough to have confidence in your grip but not so much that you feel like you can't adjust your grip easily while playing. The bright colours (I got the yellow) are a bit different from the run of the mill darker colours. Installs as easily as you'd expect of an overgrip and sticks well. They're not the thickest so you may want to layer them up depending on how thick and ribbed you like your grip to be.

This was easy to use. Peel off the protective plastic. It tells you on it which end to start with and there’s decent instructions on the box if you don’t already know what to do. 3 in the pack so good to have spares. Enough tape for a tennis racket and a bit left over which can be cut off. If you needed to use this at the side of the court you might need scissors with you. The only thing I would say is that it would be good to have slightly longer finishing tape so if you wanted to you could put it at the bottom of the handle as well as the top. Feels a nice grip once it’s on.

Read instructions before use. So, this is the first time I have ever tried to re rape a racquet. I expected this to be like a tape and sticky so it took me a while to work it out as it isn't sticky at all apart from one dot at the start point. Once I did it was pretty straight forward but the lack of any adhesive at the end was fiddly for me. You need to unroll the entire roll to get to the end, which is actually the start point.But it does the job and has a good secure feel under the hand. Hopefully, my next try will be better.

This tape wasn't quite what I was expecting (I thought it would all be sticky, like duct tape) but with a little effort I was able to use it successfully. We had a few badminton rackets in our garage and the material on the handles had degraded over time, but they were otherwise in good condition and certainly not suitable for landfill.With the use of this relatively inexpensive tape, I was able to fix the handles and continue using them, which is ideal.

This overgrip tape looks great when wrapped and you can order it in seven different colours to match your racket's colour scheme. It comes with self-adhesive on the start end of the tape and a separate sticky tape is included for fixing the wrapping end. You may find that the tape is a bit longer for badminton rackets but maybe just right for tennis rackets. The tape is soft and comfy which functions as vibration damping.It is worth to point out that this is an overgrip tape, so it will feel thin and is usually wrapped on top of the original grip.