Replacement Parts for Nexgrill 2 Burner 720-0864M 720-0864, Nexgrill 720-0864M Replacement Parts, Nexgrill 720-0864 Replacement Parts, Stainless Steel

I really hesitated in re-furbishing my $400 Home Depot Nexgrill with new burners, heat plates and igniters, since only 2 years ago I had to replace the grills for something like $35 and wondered if I was throwing more money away rather than just buying a whole new grill. Boy, am I glad I purchased this kit. It was a great value and arrived perfectly packaged. It took me about 45 minutes to remove the old corroded parts was was very simple (cut the igniter wires rather than trying to fish them through the openings) and effortless. The cotter pins were simple to remove as well... just snipped off the bent ends. Then it took only 45 minutes to install the new parts, which was very easy to do. Taking off and lowering the ignitor module made the connections easier than straining my neck to see up underneath the front panel. Amazing that the original battery still functioned after 8 years, but I replaced it anyway. No big deal that the wires that came with the new igniters were all the same length, thus leaving excess on most to them. I just coiled them up and stuck up behind the front panel, no problem. The only potential concern might be that I have a side burner, which does not use either the burners or heat plates and since I purchased a 4-burner kit, I was left with the old igniter for my side burner. Not a big deal at all since it still works perfectly and if it ever did go out, that particular burner would be easy to light with a match. All the new parts seem very high quality and a perfect fit, with all the screws and parts, and I am so happy that I bit the bullet and did the refurbishment myself for a fraction of the cost of a new grill. Should give me another 5-7+ years of use, if not more.

The kit comes with the heat deflectors, burners, igniters, and all relevant hardware. The problem I ran into, and not their fault, is the kit must not have been for my exact model. Everything fit except the igniters sat further off the burner tubes than the OEM’s. When I went to install the tubes with the igniters in place, the igniters wouldn’t fit through the opening in the inside front of the grill body. The wire can’t be in with the heat, so the igniter passes through a slot with the tube. No go. I had to drill a 1/2” hole about 3/8” off to the side of the factory opening. I passed the wire through my new hole and the igniter sat right. Makes no difference in the way it functions, it was just an extra step needed to make it work. The wires on the OEM igniters get progressively longer as needed to reach the module, but these are all the longest length needed. No big deal, bundle them up and tie wrap up behind the dashboard. When you’re working with aftermarket, generic kits, you have to problem solve sometimes. At the end of the day, the kit works great.

These fit the Nexgrill perfectly. Effectively revived the 5+ year old grill. If the warranty holds up, this kit is an excellent value.

Quick to assemble. Fit without a problem. Cleans up nice after cooking. Held up well.

Perfect fit.

Easy to install burners and flame tamers. The strikers took a little longer fishing them thru the holes and tying up the wires. Wires are all the same length so you have a lot of extra wire on the closest burners. I used some zip ties to keep them from dangling down. The originals were cut to length for each burner. Flames look even no hot spots like on my old ones. I would say it was a good deal for the money.

Perfect fit and easy to install, breathed new life into what was an expensive bbq!

Work great so far! They were a bit different than the original, so had to snip the other side a bit, but was a simple adjustment. Definitely recommended!

I bought the six burner nexgrill bbq from Costco around 6 years ago and these are the perfect replacement burners and plates for this model. It’s a little confusing to pick the correct ones for your bbq but once you’ve sussed out the numbers you’ll find the right ones. . Very easy to fit if a little messy on a well used bbq. The only small difference is the length of the wires on the igniters. The original fitted ones have the correct length depending on position but these replacements are all the same length but this is easily fixed with cable ties. So far so good and would recommend