WOLF TACTICALHeavy Duty Quick-Release EDC Belt - Stiffened 2-Ply 1.5” Nylon Gun Belt for Concealed Carry Holsters

More than I expected! Better than I expected! This belt is loaded with value! If I were doing gun belt reviews, I would definetly rate this top ten! Of all gun belts, not just Amazon gun belts. Undoubtedly top 3 of all budget belts. $27.00 got me a rigid, sturdy, low profile, comfortable CCW belt. The locking mechanism (cobra clone) is tight, and right. Slight swivel for the rigors of EDC, but secure as any out there, including the original Cobra. Rigid, and adjustable enough for both IBW, and OWB. And, at the same time! Hello fellow reviewers, the Wolf Tactical logo goes on the inside of the belt!!! Hence the velcro adjustment on the outside of the belt! Not sure what some are talking about, but it easily slips through 1.5-2.0 belt loop, standard for most work/gear pants. Extremely well crafted, and very low key. It doesn't sream gun belt, you can just about wear it with anything. Im a size 32 waist, and the medium was dead on. You can not go wrong with this belt. I think Wolf Tactical outdid themselves, and at the right price. The qaulity of this gun belt is easily worth twice the price, but Wolf got it right!

I was a little skeptical at first because of the low price and didn't know if would even hold the gun properly on the belt without it sliding down. I'm a slim profile without a belly. I've had the "We The People" belt for a month. I used a Facebook deal to get it. Took almost a month and I find it way too stiff for my IWB micro 9MM Springfield Hellcat. It's very hard to thread through the loops. I'm not knocking We The People as it does it job and it's a well made belt. But, for me and my light micro 9 it's a overkill and a pain in the ass to put on. I think for a heavier gun and extra clips and probably a heavier person it's more suited. Anyway, after searching YouTube and the net I ran across the Wolf Belt. Again, for my slim profile the thinner Wolf Belt does a super job of keeping my micro 9 with a Streamlight TLR 8G Sub in perfect position. I'm using the "Just Holster It" brand of IWB custom holster for my setup. They offer many custom holsters for laser/lights. The belt isn't too thin and not super thick either. I really like the latching system much better vs the other belt. It's well made and durable. It also threads through belt loops much easier and secures perfect with the Velcro. My waist is 32/33 and the medium was perfect with plenty of tag end to secure to the velcro with out having to cut the belt shorter. So, for a no nonsense well made belt at a very good price you can't go wrong with the Wolf Belt.

I’ve had this belt for a # of months now and have worn it everyday since. It’s been my edc belt and I’ve worn it during firearms classes as well. It’s held up very nicely but there are some things to report to future buyers. I’ll start with the bad. Like some other reviewers, I found that the Velcro isn’t exactly aligned with the webbing of the belt. The end of the Velcro hangs off just a bit. It doesn’t seem like a big deal until you strap this belt on and that little corner digs into your side, causing you to pee a little bit. Not a good look when you’re at the range with your buddies. The good news is that it’s pretty easily corrected. I just cut that portion of Velcro off. It’s kind of annoying because it frays pretty easily and from time to time I’ll have to take a lighter to that section of Velcro to melt any loose strands. Doing this, you also cut away material that’s close to the sewing that’s keeping the Velcro attached to the webbing. If you’re not careful, you could probably cut thru this and leave a portion of the Velcro hanging loose. One other thing, the finish of the adjustable end of the belt leaves a bit to be desired. It’s roughly melted into place and looks a little hurried. Not sure if it’ll eventually fail but it’s held up so far and really to this point has only been aesthetically displeasing. Overall though, this belt is super sturdy. Being double lined, it’s really rigid and able to hold a ton of equipment without folding or bending. I carry a G19 with a G17 mag for my edc. It’s just over 3.5 lbs and this belt doesn’t even flinch. It might be rigid to a fault, as sometimes if I’m wearing very lighter pants (not jeans) it’ll flex away from my body when I’m sitting in certain positions. Causing my firearm to flex away from my body. If you’re not careful someone can spot your concealed carry. Anyway, I’ve worn this belt during class too with my owb holsters as well. It’s held up great there. To sum it up, this belt handles edc iwb holsters great as well as overt owb carry as well. For the $ I paid, it’s so worth it and a great savings over the more pricey name brands.

Good belt, I have worn it consistently about 2 months now, an am very happy with it. The belt is stiff as advertised due to the double belt layers sewn together. I love the fact that it has velcro to hold the tag end after you size it to your waist. The belt buckle width is to wide to slip through pants belt loops straight-on, but I have managed to feed it through the loops of my jeans by tilting it slightly so I do not have to un-velcro the belt and adjust the size every time I want put it on a different pair of paints. Although I have not worn the belt long term, judging from its wear so far I expect it to last a few years time and would buy it again.SizingBe mindful of the size! Unlike single layer belts this one has a sweet spot for the size and due to it being double layered will not adjust to a smaller size than advertised easily. The belts 2 layers would be too thick and stiff to go through the male buckle end as easily. Where the belt does go through the male buckle end it is single layered to allow it to fit smoothly through the belt locking bar mechanism and give you the size range. Belt sizing I would say seems right on with jean sizes not your actual waist size as measured with a cloth tape measure.