OVERTURE Stone PLA Filament 1.75mm, PLA Marble 3D Printer Filament 1kg Spool (2.2lbs), Accuracy +/- 0.02 mm, Fit Most FDM Printer (Fossil Rock)

The OVERTURE Matte PLA Filament 1.75mm is a premium choice for 3D printing enthusiasts who want a professional, matte finish for their projects. This filament produces prints with a smooth, non-reflective surface, which enhances the appearance of details and gives a polished, high-quality look. Ideal for artistic creations, prototypes, or functional parts, the matte finish also helps minimize visible layer lines, delivering cleaner results.With a 1kg spool, this filament provides ample material for a variety of projects. The precise 1.75mm diameter and tight manufacturing tolerances ensure consistent extrusion and excellent print quality. It’s compatible with most FDM 3D printers, making it versatile and easy to work with. Additionally, the filament’s eco-friendly PLA composition ensures it’s non-toxic and odor-free, making it suitable for home use.Whether you’re designing decorative models, architectural pieces, or functional components, the OVERTURE Matte PLA Filament combines style, reliability, and ease of use. Its exceptional printability and matte finish make it an excellent option for achieving professional-looking prints with minimal effort.

Good quality pla. As with all of these brighter colours it needs a little fine tuning to print really well.Used it for Grinch skin colour. Started to explore more and more overture plas and having great results with them, seems to have a nice range of the less typical colours also.

Decent filament that has a nice matte black finish that I'd consider more Satin Matt (the printed article has a slight shine to it). The filament diameter is consistent. The PLA prints well at 210°C on a Prusa MK3 using a brass nozzle and adhesion between layers is good.It comes supplied with an adhesive print sheet that measures approximately 20cm x 20cm. A nice freebie for those that own a printer with a very small bed.I'd like to give it a full 5 stars but my filament came in a vacuum sealed bag that was punctured. The outer filament on the roll had taken on moisture so the initial prints were coupled with an unwelcome backing track of 'Snap, Crackle and Pop'. This also affected the print quality. After drying the filament it printed much better (see photos) but in 5 years of 3D printing I've never been sent filament in a failed vacuum sealed packet. That was an additional pain and a disappointment, so 4 stars. But apart from the issue I experienced it's very nice filament.

Having not used Overture before, I thought that I would give it a try.Initially, I had a bad experience. Poor bed adhesion and edge curling using my Prusa MK3S+. Down the line, I took delivery of a Bambu Lab A1 mini which had a setting within Bambu Studio slicer for this filament. So I gave it another shot and it turned out great! So I copied the filament setting over to pPrusaSlicer and spent a couple of days tramming the bed and getting my z-height just right for the first layer. I eventually got it like a sheet of celluloid. Now it is my preferred filament. Why faff around with something new if it works? Especially after all that research. 219 degrees hotend and 65 degrees bed was the sweet spot for me. I'm glad that I stuck at it now.

Be careful! This listing is showing a colour that does not match the final PLA you will receive, and prints do not darken the colour, it is actually PINK.The PLA itself is pretty good quality, it sticks well at about 200-210c on my Monoprice V2 and prints a nice smooth matte print with a nice consistency.But I think it's shocking how different the colour is I would describe this as more of a strawberry smoothie pink than a dusty red as the picture more closely resembles and I just think that's poor listing and misleading advertising.I already have a hot pink, and I wanted a dusty red for contrast but this is so similar without the neon edge.My colour picker onscreen shows it as #C42824, it's much more like #FF7976. Bear that in mind when purchasing as if you are looking for 'Red' this is much more 'Pink'.

This was one of the first spools of filament I ordered after buying my printer, and now a few months of printing I feel I can share my opinion on this brand of filament, and I have to say it is the best of all the filaments I have purchased from Amazon. The spool is well made and the filament is well loaded on, and does not seem to be too sensitive to humidity. The prints I have done with this filament have all been superb, and the matte finish really suits the prints I have done. I can thoroughly recommend this brand of filament.

Brought this on a whim as I'd not tried any stone effect filaments before, and was really happy with the results.It has a really weird stone _feel_ to it, which I've not had with any other PLA filament and really liked. For the first project I printed up some coat hooks, and after seeing how they came out, printed a spice rack for my kitchen.One think to be wary of is this filament is REALLY hydroscopic, and I left it on the printer in relatively high humidity for a few weeks before my next project, and found that it was ruined. I tried to dry at 50c for 10 hours but the thermostat on my food dehydrator must be wonky and it partially melted the spool and filament nearer the heating element, trashing the spool. I've brought another spool as I have a ton more projects I want to do with this.For the next spool I'll be making sure to re-vacuum bag it between prints!Printing on an ender 3 pro, with 0.4mm nozzle, at 200c and pretty high travel ~70mm/s with no problems.

Print quality is gorgeous, when it doesn’t clog my 0.4mm nozzle on long prints. Used on a Bambu Labs X1C. May have to consider using a 0.6mm nozzle for this filament.