Buyers Products WJ2024 2-1/2 Inch Mini Easy Grip Rubber Hood Catch with Bracket, 4 Pack

I used these after hinging the rear cover on my excavator. They hold well with no play because they are short.

a little smaller than expected

Perfect. Just fixed my Coleman Coolbox cooler.If you own the Coleman Coolbox Cooler/Radio/CD these are the replacement latches that you need. These are stronger than the original and have a smaller tee on the handle. Since your cooler is mounted with one screw just use the rubber latch by it self with the pin/washer and cotter pin that come with the parts bag. All you have to do is cut the old pin off your cooler latch using a hack saw or Dremel cutoff disk. Remove the new Tee and retainer pin from the new latch. It is held in with a cotter pin or apart inside the zip lock bag. Slide the pin through the cooler bracket and the new latch. Install the washer on the outside of the pin and attach the cotter pin. Now bend the cotter pin to retain it on the latch. You can also replace the new latch pin/cotter pin with a screw pin or a screw with acorn nut available at you local ACE hardware that will eliminate the cotter pin that catches on clothing.

Was exactly like the one on my RV easy to change out

Product is as advertised and was the right size to replace the cracked rubbers on my trailer. I only needed the rubber parts since my hardware was fine. It was the same product as what was on my 2014 Keystone Cougar camp trailer. Make sure you are getting the correct length because you are not going to stretch this material beyond the length is was made to fit. The rubber is very strong and hard for me to pull far enough to fit the front clip even though it is exactly the same unstretched length as the original. Worked for me.

Item was exactly as described. Worked perfect with a little engineering to the application I was using it for. I used bolts to secure the hinge to the cargo box I was putting them on, because like others say, these don't have much stretch to them, so I wanted to be sure I wasn't going to rip them out easily by using small little screws. Great price as well. Very happy.

worked, was shorter but we got it secured tractor is from 1988

this is a miniature latch - didn't pay close enough attention to the description. the rubber latch measures about an inch or so in length. it still worked for my purposes regardless of the smaller size.

These fasteners work really really well. We have a ram 5500 with a toolbox fabricator from that being on the truck with a lot of movement from potholes we found these fasteners work the best even better than the latch mechanism that was made on the box.

I use these to hold a lid shut on a wooden box. They are quite small, but exactly what I was looking for. I needed something small and inexpensive for my purpose and these work great. Seem to be very good quality.Only issue I had was one of the latches arrived missing the clevis pin and had an extra bracket in the package instead. Amazon quickly resolved this issue for me.

Were smaller than I thought..and could not use them for my purpose. But nothing wrong with the product

Good latch for the price

well made did the job fine