REBEL Case for iPhone 14 Pro Max [Crystal Series Gen-4] Non-Yellowing, Transparent, Anti-Scratch, Protective Shockproof Bumpers, Metal Buttons, 6.7 Inch Phone 2023 (Crystal Clear, No MagSafe)

I love this brand. The case is still going strong several months later. No signs of yellowing. It’s even pretty good with everyday scratches. Magnets are strong as always. There’s a nice detail of the logo imprinted on the top that I didn’t think would come on the clear version. You can also see the construction and design of the case because of the clear material. Definitely a great case and the screen protector is always great. It isn’t as grippy as the aramid one but it’s plastic but it’s not falling out of my hands or anything.

This case is very well constructed and a huge improvement on last year’s iteration. Here’s what I love:1. The case snaps on very snugly and is the most difficult case (in a good way) to install and take off.2. The magnets are very strong. Even considering the slick back of the case, this case holds anything I have thrown at it (Apple MagSafe Wallet, ESR MagSafe charging bank, and the floating Belkin 3-in-1 charger) effortlessly.3. The buttons feel nice (I love the metal feel) and are very tactile - probably the most tactile buttons I have used on a case aside from last year’s Apple Leather Case (this year’s leathers Apple case buttons are more stiff).4. The frosted back, aside from being slick, looks and feels high quality and seems like it will be very durable.5. The case has extreme drop protection (just watch his videos). Also, I have used the clear cases before and know that they do not yellow over time.6. Aside from being slippery, this case is very comfortable to hold with thoughtful places to rest parts of your hand throughout, this alleviating pressure sometimes caused by extended use.7. The case comes with a full protection screen protector in a market where an included screen protector is very rare.In my opinion, these three things would make this case the perfect case:1. Create a flatter space on the edges of the phone for swiping side-to-side that are similar to the areas created for swiping up and down.2. Create some sort of grip, as this iteration, in particular, is very slick and difficult to hold.3. The camera ring is a little shallow and would be much better in terms of protection and in balance without wobble if that corner directly above the camera were to have the same raised edge as the other three corners.Overall, this is a great case. I am very picky about the cases I use. I like quality and protection, so I am drawn to this case because it meets, if not exceeds, my needs. Due to the slippery nature of this case, I find that this version, while great, is not for me. I do, however, love the FLEX version of these cases this year and find it to be the best iteration since the original in comfort.Even though this case is not for me, I do highly recommend it for those who do not have an issue with cases that are a little on the slippery side as that was the sole determining factor in my decision. This is simply one of the best values in a case and can easily be the one d case someone buys and relies on throughout the entire ownership of the phone.

I use cases on my phones to prevent scratches on the back and to keep camera lenses from sitting directly on surfaces when laying the phone down. This case does EXACTLY that with a little corner protection too.The "clear" back is by far the clearest I've used and my phones color is easy to see and looks great with the black trim of the case. I doesn't cover ANY of the buttons on the side of the phone which is very hard to find in a case. Bonus is it's a MAGsafe case and has worked flawlessly with my other accessories.Make sure you read the product description, if you are looking for a full coverage case this is NOT the case you are looking for.

Let me preface by saying that I have previously purchased a REBEL and FLEX for the iPhone 13. No issues.For the iPhone 14 Pro Max, I've previously purchased the REBEL and now the FROSTED:I returned the GEN-4 REBEL because of QC problems:1) One of the corners where the PC and TPU (located on the back of a corner) had a sharp edge that was not properly molded.2) Inner silicone sheet had a massive gap along one side and air bubbles around the bend of the camera cutout3) The back Aramid Fiber sticker had a massive gap along the bottom and right side.These things weren't an issue on the GEN-3. So I decided to return the GEN-4 REBEL and give the FROSTED a chance. The FROSTED doesn't have any of the inner silicone or the back cover, so there shouldn't be any QC issues if the REBEL was so close to perfect, right?... Wrong, kinda.All four corners, where the TPU is molded into the clear PC are improperly cut, meaning they all are sharp. They are actual flaps that dig into my skin when I try to touch it. The case also came extremely dirty from the manufacturing process. Speckles of dust everywhere on the interior, to a point where I was wondering if this was a used product..... but that's where it really ends.Aside from the improper cuts (which may be isolated to my case specifically), there is absolutely nothing wrong with the case. Even though this is a FROSTED backing, it feels grippier than the REBEL for me. My hands are very sweaty and oily, and I don't leave fingerprints anywhere on the matte. I don't have to ever wipe the case down either.I was annoyed at first from the case being dirty and corner molds sharp. But a day later and after taking it into the sunset and just handling the case throughout the temperature variances, it's damn near perfect.About the differences between the FROSTED and REBEL: The FROSTED loses the interior silicone sheet and backing fiber, but it also loses the cutout for the interior. It is now one solid sheet of plastic that seems to be thicker and more protective for the back impacts if you were to drop it on a sharp edge. The case overall feels sturdier from replacing the interior and backing with plastic. If it weren't for the corners and the overall dirtiness, this would absolutely have been a 5 star, like their GEN-3 was.

This is the best case to show off your phone plus it feels great in your hands and it’s not bulky at all and it will protector your phone really good I wish I would have found this case before I had the rebel 4 aramid one for a about 2 weeks and now I got this clear one and I love it even more I think. Oh and I love that you can change the buttons on it that’s just another Plus!

Es la tercer funda que compro de esta marca y definitivamente voy a seguir comprando phone rebel, consegui los botones de titanio y se ven excelentes 👌 10/10

Good protection overall but what's amazing is that it still feels slim when holding it. Highly recommended!Love the matte back.

The product I was sent was in poor condition. The box was dented, the tape used to seal the box was obviously used and non sticky.The case itself had a manufacture defect (refer to the photo of the back of the case) - the design line cuts into the camera bump.There was also a small crack at the side on the inside of the case.I was rly disappointed as REBEL boasts of premium quality and I thought the product was authentic.I wanted to contact the manufacturer but it’s such a complicated process on Amazon.I’m disappointed because I like the fit of the case. But the product I got was just faulty.

Shipped from US but worth the wait. I wanted different colour switch but they were not in stock otherwise the case would look even more amazing.

The media could not be loaded.  After much deliberation I decided I’d pay £45 for a case which would take at least 2 weeks to arrives.The feel not as great as I’d anticipated but unfortunately on just a expensive case you wouldn’t expect it yellow in such a small time period.