Drinking Water Faucet Connector - 3/8" tube OD x 7/16"-24 UNS, quick-connect fitting & thread - QF-FF06
Product ID: 57244613
"Applications · Reverse Osmosis Systems · Drinking Water Filtration Systems · Water Coolers · Coffee Machines · RVs · Misting Systems · Point-of-Use Filtration Systems · Beverage Dispensers · Ice MakersFood-Grade Quality · Our fittings are produced with food-grade material and can be used in food and drinking water applications Portable Water Applications · Our fittings are suitable for potable water applications with a maximum chlorine concentrate of 4 ppm · Direct exposure to sunlight will reduce fittings service life and may lead to failure · All fittings and tubing should not be used near heart emitting appliances · For cold water applications only Technical Specifications · Body: made of food-grade Polyacetal and Polyoxy Methylene · O-ring: Nitrile (NBR) · Collet: Polyoxy Methylene and stainless steel · Working Pressure and temperature Range: Maximum 150 psi @ 70°F (10.3 bar @ 21°C) / 60 psi @ 140°F (4.1 bar @ 60°C); Minimum 33°F (1°C) Installation and Testing · Fittings and tubing installations should be inspected by pushing and pulling on the connection points and be pressure-tested prior putting into service · Fittings should not be exposed to excessive side loads and caution should be taken to prevent undue stress and excessive side loading "
| Material | Stainless Steel, nitrile |
| Brand | Avanti Membrane Technology |
| Item dimensions L x W x H | 1.33 x 0.75 x 0.75 inches |
| Exterior Finish | Stainless Steel |
| Thread Type | UNS |
| Item Weight | 0.02 Pounds |
| Number of Pieces | 1 |
| Manufacturer | Avanti Membrane Technology |
| UPC | 731882649604 |
| Part Number | QF-FF06 |
| Item Weight | 0.32 ounces |
| Product Dimensions | 1.33 x 0.75 x 0.75 inches |
| Item model number | QF-FF06 |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Measurement System | inch |
| Batteries Included? | No |
| Batteries Required? | No |
J**R
Fits perfectly, threaded effortlessly onto the Metpure faucet.
I installed “Metpure Euro Reverse Osmosis Drinking Water Non Air Gap RO Faucet Filtration System Water Dispenser Spout (Brushed Nickel) with Drinking Water Faucet Wrench RO-FW148” and I absolutely love it.The website suggests you can just convert the feed tube size by using an adapter (sold separately) by searching for item B01HUD8Q7S or B01HUBVDI4.So I did the search and ordered “Universal Reverse Osmosis Faucet Spout Quick Connect Adapter NSF Certified (3/8" Quick Connect)” that claims “Compatible with ALL Metpure non-airgap faucets” but I had to return the adapter because it did not fit onto the Metpure, wrong thread size.Then I order “Avanti Membrane Technology Drinking Water Faucet Connector - 3/8" tube OD x 7/16"-24 UNS, quick-connect fitting & thread - QF-FF06” and it threaded effortlessly onto the Metpure, no leaks, worked perfect.
J**D
Great part
Good quality part that got our water running again!
R**D
Works as advertised
Product arrived on time and worked as advertised. Would have been good if it came with the faucet. This would have avoided a couple of days delay in installing the faucet.
K**G
I'll be back
Great product. Received as expected and advertised. Keep up great work. Thanks for product and thanks for wanting my thoughts.
P**O
Five Stars
Great product but I wish Avanti would have included this with the Water Faucet - RF703A-BN Brushed Nickel.
C**P
Perfect
Solved my problem. Connected right to the bottom of my new drinking water faucet.
J**N
do not tighten too much it worked great
it worked great on my Avanti faucet
B**U
Broke as I was installing it.
I attempted to mount this on my faucet. As soon as it got snug, the part snapped in two. I have ordered a new one which I am going to merely hand tighten. Since this is a low-pressure system, I think that may be sufficient. I only wish there had been some sort of caution either in the description or on the packaging.
Trustpilot
1 week ago
5 days ago