Air Locker AP700 Heavy Duty Professional Air Punch Nailer/Nail Remover/Nail Puller. 1/4 Inch NPT Thread Air Inlet. 80-120 PSI Pneumatic Nailer Removes 10-20 Gauge Nails, Black

Bought this to take nails out of roof battons and pallets which we break for the woodburners. An amazing tool highly recommended. Pics show the gun, the battons and the outcome!

After breaking down a load of pallets for repurposing the wood for various projects and being thoroughly bored of hammering out every individual nail and pulling them from the other side I decided to investigate alternatives. Most search's recommended this air tool by air locker and since I already have a small compressor it sounded and looked like a good idea so I but the bullet and ordered one. After getting it connected up via an adaptor I decided to attach an in-line oil reservoir as it recommends unscrewing the adaptor every so often and dripping in some oil, I figured this way would be a lot less messy and save me unscrewing an air tight connection over and over risking damaging it and losing the air tight seal. Once pressurised I liked it up with the first nail and pulled the trigger, there's a fairly loud pop and the nail was gone, the piston shot it straight out the other side and left a small indent where it used to be, I then proceeded to knock out the remaining nails and it becomes quite fun, taking seconds to de-nail boards instead of a couple minutes for each one, I ended up punching out 10 pallets worth of nails in around 20 mins, with a hammer it would of taken half the day and a lot of sweating and swearing! If you break pallets down for reuse often, own a compressor and can justify the price this is an absolute game changer in terms of saving time and effort, I'm so glad I found it sooner rather than later!

overall the de-nails works well, however first delivery failed as the delivery company damaged the item , i bought it again but ended up having to pay more than the original price , which dont know why ??

Thus is absolutely brilliant. Bought this as I take pallets apart for kindling. For years I have taken them apart and then stood at my bench for hours taking nails out. With this I literally have saved myself hours and hours of detailing. This is by far the best bit of kit for this job. I've had a few jam ups with nails sliding up the side but if you trim the bent ones off to a small stub and then use this you won't have so many jams. And DONT put your hand underneath to catch tje nail as it fires out like a bullet. I found out the hard way.😩

One of the best tools I have ever bought striping nails from pallets down to 5 mins instead of 30mins using a nail bar

I tried the tip of using over a bucket. But it shattered the bottom of the bucket first shot! Works a charm tho. Could do with a larger nozzle for the old 4” nails but not sourced one yet

Simple to use, extremely powerful, makes short work of even the bentest (real word I've invented) of nails. Well made, rugged and a joy to use

This is my favourite tool in the work shop just be careful it can be brutal lol

Super buena para quitar clavos de tarimas

This is a great tool for resetting nails on a wood deck. I purchased a house with a 5/4 wood deck that was nailed down down with a pneumatic gun. Every year as the boards weather and shrink the nail heads stick up, making snag points. This pneumatic nail punch has worked flawlessly for two years setting hundreds of nails. I've found that setting the air pressure at 40-50 psi gives it just enough power to set the nails but not drive them too deeply into the planks. This is a well built tool, light weight and easy to handle. I've found that I can set 15-20 nails per minute when I 'get into the groove' which is a LOT faster than the old hammer and hand punch method.

I purchased the airlocker ap700 to assist in denailing timber when I break down pallets. This tool does the job well and I wouldn’t be without it. Compared to using a hammer to knock the nails back through and then prying them out the airlocker is way more efficient. If your into recycling pallet timber then get this tool. You will not regret it. It’s great when a nail is bent because you simply slip the nail in, straighten it and pull the trigger. Using pliers and a hammer etc is a pain and frustrating. Highly recommend this product and Amazon did a good job getting it to me in Australia.

Fonctionne parfaitement et puissante

all good