QualGear QG-KIT-S-3IN-W Pro-AV Mounting Kit for Projector - White

I strongly recommend this. It is easy to set up, strong and well made. The instructions are good and it comes with a good range of fittings (most of which you won't need) to make sure it suits all situations. It also looks quite good once installed.

Well - while the mount looks and feels sturdy - I can surely admit that - there are certain design flaws which if corrected can turn this mount from good to great. Here they are: 1) The screws that are used to lock the part that is attached to the projector and the part attached to the ceiling have heads that are too wide and can not pass through the quick mounting holes. I had to grind them down in order to make the quick mount / dismount work! 2) The supplied concrete ceiling mount plugs (ankers) are made of extremely weak material. As a result the thread breaks the first ones screws the nuts onto it! I did replace these with a heavy duty plugs from Fisher. 3) The black washers used on the 2 screws that determine the mounting angle to the ceiling are also extremely weak - they broke on the first tightening and I replaced them with Teflon washers. Apart from the above flaws thsi mount is excellent and really looks it can withstand up to 70 pounds of load. I personally used it for mounting JVC DLA-RS440(X5900) which is a 34 pound beast. Thank you for reading my review and good luck with your projector mounting :) !

Great mounting kit, extremely easy to hang, and very adaptable. I was able to use the cylinder mount to feed the cables through making them even less visible but I would suggest you do this before mounting the projector as you'll find it tricky to do afterwards! The only issue I had was the size, I had to use some force (with a hammer) on the suspended ceiling to widen them approx 3mm extra all round to fit the mount and then trim down the surrounding tiles to accommodate, but the same as most of these things better to be too big than too small.

I ordered this mount to hang a projector from our suspended ceiling in our conference room where we have 2x4 ceiling tiles. The mount actually takes the place of 1/2 of one of our tiles; it does not mount above/below an existing tile, as one of the reviews implies. I used a 2' crossmember from Home Depot to split the 2x4 opening in half, and cut the existing tile in half. Everything fit nicely. The mount is very well constructed, and everything needed to install it is included, including hardware to support the mount from structure above the ceiling tile grid. Security screws were a nice bonus to minimize tampering by others. The two knockouts were perfect for adding a receptacle as well as a keystone plate for video, data, and 12V trigger for the projector. The half of the 2x2 mount that doesn't have the projector post below it provided a perfect tray above the ceiling to mount several video-over-cat5 receivers, hidden from view, to drive the projector. The dimensions on the actual mount are a bit deceiving. It can handle a much larger projector than is otherwise implied. Each arm can extend to ~7 inches. One of the dimensional drawings showed the max distance between screws on the projector being around 8 inches, which is not the case; it's much larger. The mount easily fit my larger projector and holds it securely. Overall, the resulting installation looks very professional and well done thanks to a quality mount design.

This projector ceiling mouth system completely met my needs. It allowed me to ceiling mount the 1080p Naitive CiBest projector in away that was very sturdy. The multiple adjustable parts make it possible to get an acceptable picture focus on the screen while keeping your sanity. The CiBest projector does not have the zoom ability, so get picture focus and screen picture fit has to be done largely by placing the projector in just the right spot. Just remove the drop ceiling tile and follow the instructions. Being able to slide the projector closer or farther from the screen and move side to side within the ceiling tile frame is what this mount does that most others I looked at did not. This feature let's you hang the projector mount as a hole and slide it to best picture placement without having to simultaneously suspend the projector mammualy (my projector weighs arround 5 pounds). I completed this install easily without needing anyone to help hold or lift the mouth or projector. This mounts color and design also give it a better appearance than any other mounts with it's capabilities based on an extremely long search for mounts. This mounts ability to pivot in various directions and slide in both directions while suspend within the typical 2'x2' cieling tile frame is it's super power. Once you have achieved the best picture adjustments you can simply tighten down all parts and place the ceiling tile either in background on top of mount on either side. Looks great!

This mount is great! It covered all the existing holes, and is extremely sturdy! The cover near the ceiling is great for cable management, and the fact that I "hung from the ceiling" to test the weight capacity is just amazing! (I weigh ~200lbs). The brackets can be easily lined up with one of the many mounting holes on the projector, and the center-of-gravity is easily adjusted as well by extending or shortening the arms.

It is be used for a golf simulator mount.

Excelente calidad. Los manuales de instalación muy claros. Todas las piezas bien pensadas y el soporte muy rígido y maniobrable. Excelente para superficies de galletas en plafón.