INGTERCO 8-1/4-Inch 40-Tooth ATB Thin Kerf General Purpose Woodworing Saw Blade with 5/8-Inch Arbor

We were looking for a new 12” blade for my chop saw. We priced out the name brands and then looked at the others. We saw no difference for the most part so thought we would give it a try. I did get the 60-tooth blade as it is a good blade for finer cuts and can handle larger wood as well. I received in very fast, it was well packaged against damage, corrosion and accidental handling. It had a rubber guard around all the teeth to protect against accidental cuts. I put it on my DeWalt chop saw and chose a piece of scrap wood from the pile. I made some straight cuts as well as angled, it worked flawless. Cuts were smooth, no burning. I believe for the price, I could buy from two to three of these blades for the same cost as the big names and do just as well. Thank you,

Works well. Priced right. Not noticeably better than other brands, certainly not worse. Appears to be able to take a lot of use before re sharpening will be necessary.

Good value. Worked better in my table saw than in my miter saw. In the miter saw, there was blow out on the back size of the cut, the front of the cut was very clean. This latter problem may or may not be an issue depending on your application and wood (I was cutting poplar trim). Used in my miter saw after ripping maybe 800 feet of poplar trim in my table saw, so maybe there was so teeth wear. However, if you have a one time fine cut application (like I did), it may be a good alternate vs a much more expensive blade since the table saw cuts and the miter entry cuts were very clean. Also might work better than some rpm's than others (table saw has a higher rpm)

Put this blade on my personal saw at home. Good all purpose blade for the price. No blowout when crosscutting. Passed the test for my needs at home. Going to buy another to try out in the field and see how well they hold up to daily use.

I ordered this to replace my table saw blade. I had it out of the box and on the saw in two minutes and began cutting with ease. I cut some trim and some laminate flooring and it did not chip, blow out or burn any of the pieces. I would highly recommend this blade for a variety of applications.

Very good blade for the price. When I ordered it UPS messed up and it got here late. I had to get another blade at LOWES to finish the project. I put this blade on as soon as I got it to compare the cuts from the INTERCO blade vs the expensive blade from the box store. The cut from this blade was just as good. Only thing I did differently was to flip the blade to make the teeth run in the proper way for the cut. Honestly, for as many blades as I go through it only makes good sense to stay with this blade - why pay more. I love it

Cuts very well. I have the 60 tooth installed in my table saw and it cuts through wood like butter. I have the 80 tooth installed in my miter saw and it does nice clean crosscuts.

ok I purchased this blade because I didnt want to spend 50 dollars on a Dewalt blade I installed it on my miter saw and was pleasantly surprised it cut just as good as the blade that came with my Dewalt miter saw