YousuSilk 3D Printer Filament,Shiny Silk Sliver PLA Filament 1.75mm 1kg Spool (2.2lbs), Strong Bonding and Overhang Performance,Compatible with Most of 3D Printer

nice gold finish and prints well no stringing and good detail

Easy to use. Prints perfectly every time👍. Good value

Print layer adhesion is not great, so fragile models can be prone to breaking, which to be fair is the same for all 'silk' style filaments that I've tried. The colours are great and it gives a really nice finish to your prints. Good value for money so would buy again. ...just remember to set the infill density to 100% to increase adhesion.

I printed this on a bambu p1s using the rear spool holder, NOT the AMS. I printed at normal PLA speeds. I can't see any layer lines, the prints are strong and I can't pull them apart at all. I left it out in the sun for an hour and it glowed for a couple of hours in the dark. The colours change fairly quick, the darks are dark, and the light colours are very light. It's nice to have a multicolour glow in the dark filament rather than just solid colours.

IT MIGHT WORK, BU WITH ME AFTER GOD KNOWS HOW MANY PRINTS AND USING OME FROM EACH ROLL, IT'S TERRIBLE, BARELY ADHESIVE TO ITSELF, IT'S BRITTLE AND WEAK STRUCTURALLYiT'S ABSOLUTELY GARBAGE, SO IF YOU'RE LOOKING FOR A DECENT GLOW IN TH DARK FILAMENT, THIS ISN' IT, IT BARELY EVEN GLOWS

Hi I bought this filament as I wanted a very prue Gould colour like in the picture but I honestly feel this is not a very yellow gold but kind of a rose gold but that said it prints very nice with no stringing or blobbing and has a nice silk Finnish, im not sending the filament back to as I do like the colour it's just not quite as yellow gold as it is in the picture.

Beautiful filament, Yousu always impress me with their colour's.Great print quality, no adhesion issues, no need for extra drying. Colour's speak for themselves. I highly recommend.

Thought I’d get myself some of this filament after speaking to a few friends and it was a very good decision to make. This is unlike the other silk gold filaments I’ve used. It’s buttery smooth once printed! Had no issues using printing with it at all and it really is great value for money. Will most definitely be using this brand again!

This is a nice Galaxy PLA to print with, but I should point out a few things to keep in mind.First, this is a very abrasive filament, so I would avoid using an AMS. I used the side load on my Bambu Lab X1C and printed one at a time. I also have hardened gears, and I could see this filament chewing up plastic gears and rollers, like any other abrasive filament. The colors and shine parts are easily seen, although they can be difficult to be told apart when placed right next to each other. The pictures I show are the 4 colors in this sample pack placed next to each other,I used a generic PLA setting on my X1C and had no stringing issues or feed issues with the side filament holder. However, when manually loading this filament, I noticed that it went into the PTFE tube very tightly. I was worried it would not pull off the spool well, but I had no issues. I think if the roll was lighter, it might try to pull the roll with the filament.I would buy this filament again. The sample pack is nice for small projects if you don't use it all that much.

YOUSU Dual Color Wood PLA Filament 1.75mm BundlePros:Unique wood-like texture: Love the natural wood grain texture and color, adding a realistic touch to the prints.Good print quality: Mostly smooth, consistent prints with minimal warping or stringing.Easy to use: The filament was easy to feed and print with.Great value: The bundle's price is a good value for the quality and quantity of filament.Cons:Color variation: The dual color effect was not as pronounced as expected, with one color dominating the other on 1 of the rollsBrittleness: I found the filament to be more brittle than expected, leading to breakage or snapping at times but not too bad.Overall, the YOUSU Dual Color Wood PLA Filament Bundle is a great choice for those looking to add a natural, wood-like texture to their prints. Some minor issues with color variation and brittleness, I liked its ease of use, print quality, and value.

Love the rainbow glow in the dark. It works out beautiful 😍The yousu rainbow glow in the dark PLA works out perfectly for my projects.

I had never tried their glow filament before but have tried others that didn’t print well and didn’t glow very bright or last that long. I was able to print a mask with no problem and have issues with silk and other filaments with that mask. I was VERY impressed with how clean the print came out and the colors are absolutely stunning in the light or dark. The purple color is deep and will work for quite a few projects. I also love the shine I get from these filaments when just in the light. The rolls came very neatly rolled and didn’t even have to dry them before printing. Absolutely will buy these again, it takes quite a bit to get me excited enough to take photos and get online to share how great this stuff is. I also picked up their tri color blue purple yellow and it’s gotta be the coolest color combo I’ve ever seen and prints so silky smooth. Big fan of yousu now and can’t wait to see what they come out with next.

This is more of a shiny red with glitter than glow in the dark but printed it looks great. Worked fine in my Bambu carbon. Comes on a cardboard roll