Waterproof IP67 24v Power Supply 36W 1.5A, LED Driver 120V AC to 24V DC Converter, with 3-Prong Plug and 4.9 Feet Cable - Ideal Power Supply for LED Strips and Lights

Purchased for lighted house numbers I recently installed on our home. Tested the voltage and it registered 11.9 V DC. Hooked it up to the lighted house numbers and it works great. Price was right and it seems like a quality product. I would purchase again.

The power supplies provided with the LED light strips did not last a season. This one works great and is powering two LED strips as the original OEM provided power supplies have failed. So far so good. Easy installation.

Our EShine under-cabinet LED DC power supply died after 5years of 24/7 use. Replaced the EShine power supply with this Karyoosi LED driver by cutting the wire with barrel connector off the original Eshine power supply then soldering it to the new Karyoosi LED driver. Easily mounted to the wall behind our refrigerator using the mounting holes on each side of the Karyoosi LED driver.

Works well for my Outdoor lights but not sure how long it will last in the rain and snow. The strain relief was not mounted all the way in but I suspect the internal board is potted so may not be an issue. Puts out 12V DC so dont believe what the label says. Its Chinglish or something. No way this could pass CE with that label which is typical for this type of product. Say 12V=3A ha then has 50/60Hz after that! Not DC according to the label.

It worked but i return it since i ended up not actually needing it

Because an LED power supply changes household 60 Hz AC to DC, it has hardware that turns the alternating polarity of the household current into 60 or 120 Hz pulsating direct current. Incandescent (heated, glowing filament) bulbs can't heat up and cool down as fast as 60 or 120 times per second, so they inherently even out the current reversals and produce a steady light. LEDs, however, can turn on and off fast enough to produce 60 or 120 Hz strobing light. There is electronic hardware that smooths out those on-off cycles, resulting in steady current and therefore steady light. If that hardware is not part of an LED power supply, the lights will strobe. If that hardware IS present, the light will be smooth and steady. By rapidly waving your hand sideways when illuminated by a light, or by darting your eyes rapidly across the light itself, if it is strobing, you'll see more fingers than you have, or the light will appear as a dashed line. If it is not strobing, your fingers or the light itself will appear as an uninterrupted smear of light. Bottom line: this power supply does NOT cause strobing, which is superior to one that does. Strobing causes eye fatigue. The only shortcoming (pun intended) is that I needed to buy a 2-foot extension cord to reach the wall outlet.

Exactly what I expected.

Did not work for my application

So 3 of these drivers have failed; all in less then a year, all with less then 3A draw on them! I guess these are way over rated then listed! Got a different brand and will not waste my time with the rest of these I purchased. Seller refused to warrantee anything.