VEVOR 28 Inch Adjustable Furniture Legs, Square Reinforced Steel Office Table Legs Set of 2 for DIY, Max Load 1000 lbs Heavy Duty Desk Legs, Quick Instalation & Rich Accessories Legs Black

These were super easy to install! They came packaged nicely to protect the coating! The legs were individually wrapped in plastic inside the box to avoid scratches. They come with adjustable little knobs that screw into the base if you need to level the table, but you don't have to use them. They have held up really well so far for almost a year (in an industrial setting for training tables) and are easy to wipe clean! The color has not changed and haven't had any scratches yet.Also has pre-drilled holes that make it easy to mark and drill.It did not come with screws for the table base (you'll need a table base separately), which makes sense because the screw length would depend on the table top depth. It would be helpful, though, if they told you the gauge of screw you'd need. I did have to buy several different packages to see what would fit. I ended up using 6' butcher block table tops that we got on clearance at Home Depot for $30 each!I did use a drill to pre-drill my holes into the base, and would recommend that! Again the legs have holes pre-drilled for you, so it works as a really nice guide for your table top!Would recommend 5/5!

I was setting up a table over my dog crate with 3/4 inch plywood. These legs worked great. It is very stable and fits perfectly over the crate. It was hard to find the table size I needed. So, I opted on making one myself. The screws that came with these legs were longer than what I needed for the plywood. So, I ordered #8 x 5/8" (15.87mm) Deep Coarse Thread Phillips Pan Head Black Phosphate Wood Screws. These fit perfectly without penetrating the plywood. The weight limit for my table will be limited by the plywood and not by the legs. They could have handled a thicker top. But, I wanted to keep my table light weight. I have just what I wanted at this point.

These are nice and sturdy with super hardware (adjustable feet). Everything from Vevor is always top notch

Baught for butcher block table in dining room. Super easy to make a non laminate table this way. Very sleek looking. Seems sturdy.

Super sturdy legs worked great with my table i had made

I used these as part of a 7' computer desk I built. The legs arrived well packaged an undamaged. Both legs were nice and square. The welds were pretty good, better than expected really. The powder coat paint finish was acceptable and feels durable. All the bolt holes were correctly spaced. Attaching them to my desktop was straight forward and even though I didn't use them, I like the included height adjustment feet. They too were heavy duty and would have worked well if needed. Overall, these desk legs have exceeded my expectations and I would absolutely recommend them for your project!

VEVOR Hairpin Metal Table Legs 28 Inch Desk Legs Set of 4 Heavy Duty Bench Legs 3-Rod Metal Furniture Legs Wrought Iron Coffee Table Legs Home DIY for Dining Table w/ Rubber Floor Protectors Black.My message to VEVOR Customer service"I installed these legs today, not one leg matches the other, each is a different angle. I checked with an angle gauge from the baseplate to the leg, they don't match. This was a lot of work for me, I'm disabled, very disappointed. I should have measured them first, such a simple product, didn't think I needed to."From:Vevor Customer Service"Dear customerThanks for your message and sorry for the inconvenience causedBut we can not see any issue from the picture you sent,did you measure the legth and angle gauge of these 4 legs?What is the angle difference between them? Does it affect use?Any questions, please feel free to ask meHave a great dayAnneCustomer SupportMay 27, 2023"My reply,"You can see the difference between the right front leg and right back leg in the image. I will post it with my bad review on Amazon. Yes, I did measure the baseplate to leg angle and there was 3\16 of a difference. Does it make it unusable? No, but it looks like garbage in my living space. I paid for a matching set of legs, not a mismatched group of four. Such a big company, and you can't help your customer on such a low-dollar Item."I have included a second image here, looking down at the misalignment of the two front feet on the floor. It is unfortunate because these legs are of good, heavy, well finished materials. Clearly poor quality control.I will update if they choose to respond further, this is a BIG company, I expected better.

Bought these for a small table top I wanted to make into a dinette. The legs are sturdy, but there is minimal instruction provided. As such I found it difficult to get the angled legs to align properly. The bolt pattern for attaching to the table wasn't much help either, as the holes in the plate are at an odd angle. It was nearly impossible to gauge if the legs were set at the correct angle to both the corner of the table and to each other until the whole thing was assembles and the turned up right. Since the legs were all off just slightly, the small table was wobbly and would not sit flush to the wall. I would try re-assembling it with a helper to make the mounting easier, but i am not sure that would actually address the other issues with the design.A note: I found these legs to be on the tall side for a dining table. This was corrected somewhat by removing the adjustable feet from the legs, but it still wasn't great.If properly installed, these would be perfect and attractive enough, however because of the difficulty I experience, I will likely be swapping them out for a set of generic hairpins.