Liquid Stands Keyboard Stand w/ Wheels - Black Z Style Adjustable & Portable Professional Heavy Duty Digital Piano Stand - Fits 54-88 Key Electric Pianos - Sturdy Rolling Musical Keyboard Stand

This is one of those perfect products. I found myself looking for a sixth star to rate every aspect of this stand. LEG ROOM: I have this stand adjusted to its widest (and one notch from lowest) setting to accommodate my Casio WK-6600 keyboard for "seated" playing and there is enough leg room to sit side-by-side with another person with plenty of room for both peoples' legs. You can also raise it up to accommodate standing while you play. EASY TO ASSEMBLE: I always keep an eye on the instructions when I am assembling something, but I really didn't need to here. It's nearly fully assembled as it arrives. Small parts (and there aren't many) come separated into sealed, labeled compartments of a clear plastic bag for easy identification and NO tools are required. There IS a small, included, stamped wrench to tighten the wheels but if you apply the wheel locks before installing, you can twist them into place without the wrench. (I did use the wrench for a final "snug" once the wheels were installed but realize I didn't really need to.) All screws have large, plastic heads for easy hand tightening. Assembly was a breeze! STURDINESS: This thing is built like an army truck and is clearly way stronger than it needs to be to handle ANY keyboard I have ever encountered. Welded seams are complete and smooth... even attractive. I did not sense the slightest degree of wobble or rattle... even when rolling it around on my carpet. The wheels turn smoothly and the wheel locks are both strong and easy to engage and release. SECURITY STRAPS: I have never been a big fan of the "strap" mounting technique for keyboards, but the whole industry seems to use it for its universality. Every brand and model of keyboard is designed a little differently on its bottom so they have to use a method of mounting that can be used with all of them... so I guess the straps make sense. (I really think the keyboard industry should work on a standardized mounting lug configuration so they all attach securely and in the same way.... but this is not "Liquid Stand's" fault.) Given the vast array of keyboard designs they set out to accommodate, the straps seem to work well and they are very strong. Also, the included, peel & stick, non-skid pads (that are easily affixed to the top rails of the stand) do an excellent job of holding the keyboard in place. Even if there were no straps, you'd have to bump the keyboard VERY hard to knock it off the stand. SIZE ADJUSTMENTS: Both width and height can be adjusted in seconds. There is a spring-loaded knob for each adjustment that just needs to be twisted loose (counterclockwise) a single turn... and then pulled away from the frame to allow the square telescoping tubes of the frame to be pulled further apart or pushed closer together. There are drilled holes in the inner square tube that the stem of the knob snaps back into to lock it into place. Once the proper adjustment is achieved, a quick clockwise turn of the knobs snugs everything back up so there is no rattle or wobble in the stand. HEADPHONES HOOK: It can be mounted to the left or the right (or removed entirely) and attaches with a single plastic-head hand screw. Again... no tools required. (Note: If you choose not to use the hook but don't want to lose it, you can mount it backward and it tucks away neatly under the keyboard to store it.) OTHER POINTS: - In addition to the wheels, leveling screw-in feet are included as an option for anyone who does not plan to roll the stand and prefers to keep it stationary. I don't really plan to move my keyboard much but I chose the wheels because they lock so securely... yet I maintain the option of unlocking them if I ever do need to move it. With the wheels installed, I put the included feet in a small zip-lock bag (along with the stamped wrench) and zip-tied the bag up underneath the keyboard where they are out of sight but stored for future use, if ever needed. - This unit is so strong and rolls so smoothly, I am seriously considering purchasing another to mount a work surface on to create a strong, rolling work table. With a creative mind, this stand could be retrofitted to a myriad of things from tools like an electric miter saw or drill press to other electronic devices like amplifiers or heavy computer printers. PRICE: I almost bought a cheaper imitation but I would have only saved about $20 and I am so glad I decided on this "Liquid Stands" model. It's worth twice its price, easily, in my opinion. If you keep an eye open, you may find this stand on sale that could save you a little money. I have seen a sale price for this on Amazon appear twice in the last three days. As of the writing of this review, the Amazon regular price is $72.00 but I bought mine on a one-day sale for $66.25... not a huge savings but it got me almost $6.00 closer in price to the cheaper imitation I almost bought. SUMMARY: As I said at the outset... This stand is quite simply "perfect." I have bought hundreds of items on Amazon ranging from "junk" to outstanding products but this stand is, by far, the most impressive of them all. So, if you're thinking about ordering this item... stop thinking and just order it. You won't be disappointed. Besides, if for some reason you didn't like it, you could always return it for a full refund but I think that is VERY unlikely. WARNING: Don't be swayed by those who gave this one star and a bad review. I think they are posted by people with interests in competing stands or who have some other agenda. The comments they expressed don't even remotely describe issues that are possible with this stand. Trust what is being said by the vast majority of those commenting... that it's 5-stars in every regard and impressively designed and manufactured.

Dear Mike, I purchased one of your Liquid Stands Z style keyboard stands, model MS1080, and a matching stool because I didn't like the looks of the suggested side stands for the Yamaha DGX-670 keyboard I had purchased. I was a little disappointed. Not with the stand and seat, but that I didn't find a single thing to complain about. Everything went together perfectly, bolts and holes mated up perfectly, and holes were reinforced when threaded. There were no missing parts, which in my experience with Chinese manufacturers, usually happens. Actually, there were two lock-washers left over, which is good, because I usually drop small things into my carpet and the carpet eats them. It even had solid feet as well as locking type wheels, which gives one a choice; I chose the wheels because it rests on carpeting. The stand is very sturdy and stable, well engineered, looks much nicer than the side panel stands would have, moves easier, and both the seat and keyboard height adjust easily. I am quite pleased, and I would recommend your Liquid Stands to anyone. I don't often write in about things like this, but the quality of workmanship deserves special notice. Thank you for a great product.

If you’re buying a stand for your music equipment, I’m not really sure why you’d buy anything else. Solid and goes together in minutes. It extends either horizontally or vertically, hold tons of different types of equipment, comes with straps. Nice thick steel great stuff.

I'm amazed at how good this stand is. It is extremely well-built and provides rock solid stability for my 30 pound digital piano. The width and height are highly adjustable, and the adjustments are easy to make. I almost bought a very expensive ($350) stand because I'm tired of flimsy, wobbly stands, and I was doubtful that a stand at this price could be very good. But I decided to give this one from Liquid Stands a try, and I'm so glad I did. I could not be more impressed with it. A huge thumbs up from me. One more thing. I was worried that my shins might hit the crossbar that connects the two vertical pieces together. Well, that is not a problem at all. When I'm seated at the piano with my foot on the sustain pedal, the crossbar is almost 12" away from my shin. I'm often underwhelmed by products whose advertising over-promises and under-delivers. This stand is NOT one of those. It is every bit as good as the advertising says . . . and maybe even better. I don't leave glowing reviews unless a product really, really impresses me, but this is one of those great products that needs to be commended.

I bought this for my new 88 key keyboard. I particularly liked the fact that it had wheels which allowed me a lot of flexibility in moving it if I needed to. I also like the stability of it. It is easy to adjust the height, all you do is remove the screw and line up the holes and then put the screw back in and tighten it. It is the same thing with the cross brace. It is very sturdy and of course becomes more so as you bring the left side and the right side together to fit your particular keyboard. The only thing I didn’t quite understand was where to place the keyboard on the stand so that there was enough coverage on the left and enough coverage on the right and enough in the center to give me a good balance. I went out to YouTube and Google and looked at a lot of pictures and I was able to see that basically it is a third in the middle and then you split whatever is left on the outside edges and set that on the supports. This might vary based on your keyboard but I think it’s a pretty decent rule of thumb. My son is a musician and I had him check it after I did it and he said that I nailed it! This was super easy to put together and it’s made really, really well! I am very impressed with this product!!!!

This is the best keyboard stand I have ever owned! It has sturdy metal construction and all of the knobs are large and fasten the parts together tightly. Thanks to its excellent design, there are no sharp edges. The casters are solid and have brakes so that the stand won't roll once it's in position. This stand deserves six stars :)

This stand is very sturdy and was so easy to assemble. Total time to unbox and assemble (without even looking at the instructions) was less than 5 minutes. I paid $5 extra for the model with wheels because space is limited and I will have to roll this out when my daughter wants to play her piano and roll it back to a storage area when she's done. I was pleasantly surprised to find that it came with both the the wheels and the feet. If I ever decide to remove the wheels and put on feet for a more permanent placement I already have the feet. Assembly was all hand and thumb screws so no tools are required, with the exception of screwing the wheels into the stand. You can easily screw them in by hand but you should use a wrench to torque them down. Thankfully it came with a wrench included. Granted it's a cheap use it once and throw it away wrench but it is sufficient for the task at hand to just tighten down the four wheel bolts. So I didn't have to walk out to the garage to get a wrench. Once assembled the stand is very sturdy and rolls easily without feeling unstable. The wheel locks are easy to engage and release, and they lock well enough to hold it in place and not move around when playing it. The height is easily adjustable to accommodate a range of height differences as well as the ability to adjust it for playing seated or standing. The width is easily adjustable as well to accommodate a range of keyboard sizes. My daughter has a full 88 key piano so it has to be at it's widest setting but it fits well. From what I can tell at it's narrowest adjustment it would be just about perfect for a 61 key keyboard. My one small complaint with this stand is the securing straps and thumb screws for attaching them. Not that there is anything wrong with them, other than the fact that it only comes with two straps and thumb screws. My daughter's Yamaha piano has four anchor points on the bottom. The straps screw right in and seem sufficient for holding the piano if there were more than two. Because of the placement of the anchor points on the stand (centered) and relative position of the anchor points on the piano (near the corners) you can't really secure it in a way that feels like it couldn't be knocked off with only two straps, you would need at least three and preferably four. I would give this product 5 stars if it came with four straps or at least if they provided a way to order more. There are no replacement part numbers on the instruction sheet nor is there any company contact information. So if one of the straps break or if you just want to order more like I do, you can't. You will have to make your own strap from an old belt or something like that and go to the hardware store and find the right thumb screws. Give me two more straps and thumb screws or provide me with a means to purchase them and you will have a 5 star review Plixio.

We are using for a Roland digital piano. This is perfect. Easy to assemble, sturdy, and easily adjusted. Would recommend.

Al principio estaba esceptico de comprar este soporte para mi cabina, dado que uno siempre se inclinca por las marcas de confianza de renombre. Desde el momento en que abrí el empaque me quedé impresionado de la calidad y acabados con los que está construído este stand, al tacto se siente la inversión en pintura de calidad, las válvulas de mariposa y los tornillos todos con tapón de hule para disimularlos y protegerlos. Lo más importante quizá es la versatilidad que proporciona este soporte, además de que está diseñado para el músico/dj que puede moverse de su estudio al escenario, y viene con las adaptaciones para esa movilidad, ya que puede instalarse sin las llantas para que se mantenga fijo, o dejarle las llantas que además tienen un freno para fijar la posición que uno desee. Y ese es otro plus, que viene con diversos accesorios para diferentes necesidades, además de que puede instalarse a diferentes alturas, diferentes distancias para diferentes equipos. Una de las cosas más importantes es la resistencia, ya que sin duda aguanta los 100 kg que vienen especificados, yo lo uso para un case de 75 kg y ni cosquillas le hace. Viene con un instructivo para instalación muy sencillo de seguir, no es necesario ver ningún video o tener asesoría. Además, también trae unos pads de espuma que se pegan a los soportes laterales para que no se maltrate o se raspe el equipo/case/teclado que se coloque encima de este.

Dieser Keyboardständer ist nur für zu Hause gedacht und nicht für Gigs. Ich hab in meiner kleinen Wohnung das Epiano vor einem Bücherregal stehen. Ab und zu muss ich an das Regal und dann kann ich jetzt das Epiano einfach wegrollen. Wenn man die Rollen feststellt, werden sowohl die Räder als auch die Drehgelenke fest und daher ist das ganze dann wirklich stabil. Momentan habe ich ein besonders leichtes Keyboard drauf (Korg Liano) aber bald will ich ein Roland FP E50 kaufen, das 17 kg wiegt. Ich vermute ganz stark, dass der Ständer damit genau so stabil sein wird. Sonst schreibe ich nochmal.

Please y surprised, sturdy, well designed and easy to assemble. It has wheel and regular pads. I used the wheels. Would buy again .

I love it. It feels nice and sturdy, with wheels at the bottom to move it around the house easily. There's a locking mechanism on the wheels too. The only downside is that it is not really foldable and portable. Once it is assembled, it stays standing. This keyboard stand is also not suitable for those who like to adjust the height of their keyboard frequently. You'll have to take off your heavy keyboard, adjust the height, and then put your keyboard back on it. I would've gladly paid twice the price for that feature. But at this price, it's definitely good enough.

This is a high quality, presicion engineered keyboard stand at a reasonable price. It came with easy to follow instructions. The casters are smooth and are lockable. The only minor issue I have is the supplied keyboard lock bolts don't fit my Korg Piano but that is a minor issue as I can get alternative bolts. It's very sturdy, easily adjustable and the knobs for adjusting are spring loaded to allow you to easily find the holes for re-positioning. As another reviewer mentioned the welding of the joints is first class. I am thrilled with this stand and would give it 6 stars if I could.