Neatfi XL 2200 Lumens 24W LED Desk Lamp - 4-Level Dimmable Task Light | Home Office, Crafts & Workbench | 50cm Wide Head (White, Non-CCT with Base)

I've bought a few different light brands in the past to help me illuminate my painting area for painting Warhammer minis but each had their own issues. Looking online, the most commonly recommended light was the Neatfi XL but I was a little hesitant with spending so much. I wish I'd done it earlier, I'd have actually saved money in the long run from buying cheaper lights hoping to achieve the same result. The light is fantastic, the size of the light covers my painting area easily and thanks to the adjustable brightness, I can make sure I have the right amount of light for what I need. The manoeuvrability is also great; I can easily shift the light to where I need it. For example, I can move it to the side and swivel the head to ensure I find light up my minis for when I'm airbrushing (using an old Amazon delivery box as a airbrush box). I bought the non-CCT version (can't change the colour temperature) as I only need a daytime white light for painting. I would recommend this easily.

I paid £87.96 for this on 20/12/22 during a sale. It felt expensive even on discount, but when it arrived and I had set it up I felt a lot better about the price, because it's a really decent light. It feels very well made. The fitting used to attach it to a desk works great, and it fits easily onto the corner of my desk. The arm for moving the light around has the perfect balance of stiffness to keep it exactly where you move it, while also being easy to move it - you change the high and and position by dragging it around, and the angle of the light on the arm is changed by loosening/tightening an adjusting wheel. The light itself is very wide - I measured it to be about 50cm. The diffused light it emits makes it perfect for illuminating whatever is beneath it from all angles, so it's great for activities like painting models where shadows can be a pain. It's also super bright, so much so that I always put it on the lowest setting while using it (there are 4 brightness levels). I don't know this is definitely the case, but the tone of the light feels like sunlight - when I have it on during the night I feel like it keeps me awake/alert. Overall, I highly recommend it! I think it's a fantastic product, and would certainly buy it again.

I have now bought four of these task lights!! I am very happy with their performance ! I use them every day in my workshop. The LED light is great to work with and you can have four light levels! Multi position counter lever arm, large lamp head, eye care facility, not too bright. About 6000 Kelvin daylight, warm, 20 watt LED , 50,000 hours use. Memory light settings, they may seem expensive but for serious workshop use why not, you must be able to have a excellent light source. Then you can work well and not have to worry about eye strain? I am more than happy with my task lights!! The magnifying lens lamp is great, I have tried a few other task lamps but I was disappointed? Try them?

What a super light, I ordered one before this and the light was very poor in comparison, this is very very bright and great for craft, sewing model painting etc. The only shame is that it is fixed with a side bracket to the edge of the table you are using, I salvaged an old heavy angle poise base as my table doesn't have a lip for the side bracket. It works fine in that but would have been nice to have the option as they would match [silver lamp, white base] It is good that it is plugged into the mains and not a usb fitting. The only other problem is that it has a three year extended warrantee but the page comes up as an error, have sent message to supplier to see what to do , will update when I get a reply. I have only given 4 stars because of no base and unable at the moment to get warrantee done.

I bought this lamp in order to help me paint miniature figures for wargaming. I had read several reviews for several different lamps, but the reviews for this one were quite good, and it was not too pricey. Yes it is close to one hundred pounds, but if the lamp lasts as long as it should, it represents excellent value for money. I am slightly older now than when I last did painting, and I wanted to get into it to such an extent that I could start submitting projects for competitions. I have used it in the last fortnight and have not been disappointed. It gives excellent coverage of the model and there are several light settings, so if the light is a bit on the bright side, you can turn it down. Using the light I can pick out some fine detail without the need to resort to a magnifying glass. It is easy to set up and very stable. I do not have a dedicated room for my modelling, so I end up working on the dining room table a lot. Once clamped in place, it is very stable and easy to control in terms of how close you can put it to the model. You can also fully extend the top part of the arm without the lamp coming out of the clamp due to the altered weight distribution. The only thing that I would point out is that the lamp cannot rotate 360 degrees and it can be a little awkward to move it around until you are use to it. There is a pivot guard just above the light that can get in the way of it's movement sometimes. This is only a very minor issue and once you get used to dealing with that, it becomes easier. Because it is so minor, I have kept this to a 5 star review. If, like me, you are someone who is coming back to a hobby due to staying indoors and need some light to help you, then I recommend this light.

Third one of these I've bought. The other two are 5 years old and working just as good as the new one.

Updated 1st Purchase As desk work light to go in wife's sewing room. Clamped to desk, positioned over sewing machine, the light is a good length at around 20" and giving a good white light that I'd guess isn't too far from daylight (5500K) which for this type of work or anything that involves colour is vital. Many similar lamps will give off a much 'warmer' colour light which means you wont see the true colour of the things you are working with. The human eye is designed to see 'true colour' in natural daylight which is around 5500K. The light output is excellent giving a bright defused light on the work area, the lamp is height adjustable over a good range so you wont be banging your head into this lamp. When we were ordering my wife was a bit "£95 for a desk lamp!!!" but now it's installed is very pleased. Classic example of getting what you pay for. Negative points lamp offers a range of output levels by multiple presses of the on/off switch, can't see this being much use suspect for most it will either be on at max light output of off but a minor point. Would I buy this again? YES in fact I have my eye on an illuminated magnifying lens version of this lamp from the same company for my desk! 2nd Purchase Finally decided to go with the regular desk lamp rather then the unit with the magnifying lamp as I'd only use the magnifying lens occasionally but its got a slightly lower light output of 1600 lm against the regular desk lamps output of 2200lm. So having purchased two I'll leave you decide if that's a recommendation???

We bought two of these lamps, one for 28mm model painting and one for crafting. The are well made, simple to operate and give a bright natural light, very close to daylight. Considering the price of other similar lamps they represent good value for money and a small extra bonus is that they look smart too. Assembly is simple and takes just a couple of minutes to unbox the lamps secure the clamp, place the arm in the clamp and then place the lamp in the position you want it. The clamp is reasonably large so you do need a reasonable lip on your desk or table to secure it in place. The lamp head has a locking facility so it does not move around once in position. I would recommend this product.