After Market Version Of Quadrafire Pellet Stove Vauum Switch, SRV7000-531

Works great seems to be good product so far.

Have PelPro PP130 stove. Vacuum switch went out, and replaced with this one, working fine. (While waiting for switch, jumped wires going to switch with a copper wire to keep stove running. Keeps stove running but will not go into immediate shutdown mode if you run out of pellets, so make sure you keep it filled until you get replacement or you may end up with a house full of smoke smell).

My beloved Quadrafire Mt. Vernon pellet stove kept turning itself off last winter over Vaccum switch errors, and after some research, I decided to try installing it myself. The local repair shop quoted me a 6 week wait (in season) and over $400 to come out to repair it. I decided to try it myself and it was SO easy! Honestly, it took about 30 minutes, most of that time being trying to find a scewdriver :) The left panel comes off and it is located right there, simply unscrew the old one and reconnect the new one. I also replaced the hose it was connected to at the same time (purchased a length of it from local hardware store for $1.53). Easy peasy!

The vacuum switch that I received is absolutely IDENTICAL to the original by Quadrafire. I saved much $$ by purchasing this particular switch over others that I saw listed. Installed it in minutes and works perfectly. Would purchase again in a heart beat!! HIGHLY RECOMMEND!!

Worked as expected

Product came exactly as advertised and quickly. Only issue was the packing of the part when shipped, which could have been better. I contacted the vendor of my concern and he promptly contacted me back to assure my satisfaction. I immediately installed the new vacuum switch and it has worked flawlessly, so far. My old switch was new with the stove, installed over 12 years ago. It had chronically failed and with the coldest weather now upon us, time for a change. It does not come with a hose, but got one, 3/16th inner diameter, at the local hardware store for less than a dollar. Replaced the old switch in less than five minutes. If you stove starts, no pellets dropping and igniter not firing, the vacuum switch needs to be one the first points of failure in identifying your issue.

Fits perfectly. Works as it should. Connection is a bit different than the original but just takes some tinkering to figure it out.

I used it on my pellet stove put it on and it worked. Very happy with part. The only thing I was upset was it didn't come until today. But I understand what the problem was.